عن الملكية الفكرية التدريب في مجال الملكية الفكرية إذكاء الاحترام للملكية الفكرية التوعية بالملكية الفكرية الملكية الفكرية لفائدة… الملكية الفكرية و… الملكية الفكرية في… معلومات البراءات والتكنولوجيا معلومات العلامات التجارية معلومات التصاميم الصناعية معلومات المؤشرات الجغرافية معلومات الأصناف النباتية (الأوبوف) القوانين والمعاهدات والأحكام القضائية المتعلقة بالملكية الفكرية مراجع الملكية الفكرية تقارير الملكية الفكرية حماية البراءات حماية العلامات التجارية حماية التصاميم الصناعية حماية المؤشرات الجغرافية حماية الأصناف النباتية (الأوبوف) تسوية المنازعات المتعلقة بالملكية الفكرية حلول الأعمال التجارية لمكاتب الملكية الفكرية دفع ثمن خدمات الملكية الفكرية هيئات صنع القرار والتفاوض التعاون التنموي دعم الابتكار الشراكات بين القطاعين العام والخاص أدوات وخدمات الذكاء الاصطناعي المنظمة العمل مع الويبو المساءلة البراءات العلامات التجارية التصاميم الصناعية المؤشرات الجغرافية حق المؤلف الأسرار التجارية أكاديمية الويبو الندوات وحلقات العمل إنفاذ الملكية الفكرية WIPO ALERT إذكاء الوعي اليوم العالمي للملكية الفكرية مجلة الويبو دراسات حالة وقصص ناجحة في مجال الملكية الفكرية أخبار الملكية الفكرية جوائز الويبو الأعمال الجامعات الشعوب الأصلية الأجهزة القضائية الموارد الوراثية والمعارف التقليدية وأشكال التعبير الثقافي التقليدي الاقتصاد التمويل الأصول غير الملموسة المساواة بين الجنسين الصحة العالمية تغير المناخ سياسة المنافسة أهداف التنمية المستدامة التكنولوجيات الحدودية التطبيقات المحمولة الرياضة السياحة ركن البراءات تحليلات البراءات التصنيف الدولي للبراءات أَردي – البحث لأغراض الابتكار أَردي – البحث لأغراض الابتكار قاعدة البيانات العالمية للعلامات مرصد مدريد قاعدة بيانات المادة 6(ثالثاً) تصنيف نيس تصنيف فيينا قاعدة البيانات العالمية للتصاميم نشرة التصاميم الدولية قاعدة بيانات Hague Express تصنيف لوكارنو قاعدة بيانات Lisbon Express قاعدة البيانات العالمية للعلامات الخاصة بالمؤشرات الجغرافية قاعدة بيانات الأصناف النباتية (PLUTO) قاعدة بيانات الأجناس والأنواع (GENIE) المعاهدات التي تديرها الويبو ويبو لكس - القوانين والمعاهدات والأحكام القضائية المتعلقة بالملكية الفكرية معايير الويبو إحصاءات الملكية الفكرية ويبو بورل (المصطلحات) منشورات الويبو البيانات القطرية الخاصة بالملكية الفكرية مركز الويبو للمعارف الاتجاهات التكنولوجية للويبو مؤشر الابتكار العالمي التقرير العالمي للملكية الفكرية معاهدة التعاون بشأن البراءات – نظام البراءات الدولي ePCT بودابست – نظام الإيداع الدولي للكائنات الدقيقة مدريد – النظام الدولي للعلامات التجارية eMadrid الحماية بموجب المادة 6(ثالثاً) (الشعارات الشرفية، الأعلام، شعارات الدول) لاهاي – النظام الدولي للتصاميم eHague لشبونة – النظام الدولي لتسميات المنشأ والمؤشرات الجغرافية eLisbon UPOV PRISMA UPOV e-PVP Administration UPOV e-PVP DUS Exchange الوساطة التحكيم قرارات الخبراء المنازعات المتعلقة بأسماء الحقول نظام النفاذ المركزي إلى نتائج البحث والفحص (CASE) خدمة النفاذ الرقمي (DAS) WIPO Pay الحساب الجاري لدى الويبو جمعيات الويبو اللجان الدائمة الجدول الزمني للاجتماعات WIPO Webcast وثائق الويبو الرسمية أجندة التنمية المساعدة التقنية مؤسسات التدريب في مجال الملكية الفكرية الدعم المتعلق بكوفيد-19 الاستراتيجيات الوطنية للملكية الفكرية المساعدة في مجالي السياسة والتشريع محور التعاون مراكز دعم التكنولوجيا والابتكار نقل التكنولوجيا برنامج مساعدة المخترعين WIPO GREEN WIPO's PAT-INFORMED اتحاد الكتب الميسّرة اتحاد الويبو للمبدعين WIPO Translate أداة تحويل الكلام إلى نص مساعد التصنيف الدول الأعضاء المراقبون المدير العام الأنشطة بحسب كل وحدة المكاتب الخارجية المناصب الشاغرة المشتريات النتائج والميزانية التقارير المالية الرقابة
Arabic English Spanish French Russian Chinese
القوانين المعاهدات الأحكام التصفح بحسب الاختصاص القضائي

Industrial Designs (Amendment) Regulations 2012، ماليزيا

عودة للخلف
أحدث إصدار في ويبو لِكس
التفاصيل التفاصيل سنة الإصدار 2012 تواريخ بدء النفاذ : 15 فبراير 2012 نص صادر : 26 يناير 2012 نوع النص اللوائح التنفيذية الموضوع التصاميم الصناعية

المواد المتاحة

النصوص الرئيسية النصوص ذات الصلة
النصوص الرئيسية النصوص الرئيسية بالإنكليزية Industrial Designs (Amendment) Regulations 2012        
 
 Industrial Designs (Amendment) Regulations 2012

Industrial Designs (Amendment) Regulations 2012

Citation and commencement

1. (1) These regulations may be cited as the Industrial Designs (Amendment) Regulations 2012.

(2) These Regulations come into operation on 15 February 2012.

Amendment of regulation 5

2. The Industrial Designs Regulations 1999 [P.U. (A) 351/1999], which are referred to as the “principal

Regulations” in these Regulations amended in regulation (5) by inserting after subregulation (3) the following

subregulation:

“(3a) Where the application is—

(a) signed by an agent in accordance with subregulation (2) and the agent files the application; or

(b) signed by an applicant in accordance with subregulation (2) but the application is filed by an agent,

the agent shall file ID Form 1 and ID Form 10 accompanied by the prescribed fees”.

Amendment of regulation 6

3. The principal Regulations are amended by substituting for regulation 6 the following regulation:

Language of documents, translations and transliterations

6. Where any document, as prescribed under the Act and Regulations, given or sent to or filed with the

Registrar, or any part of the document, contains or consists of a word or words in characters other than

Roman or in a language other than the national language or English language, it shall, unless the Registrar

otherwise directs, be accompanied by—

(a) a translation and, if the case requires, a transliteration, of each word in the English language, certified or

verified to the satisfaction of the Registrar; and

(b) a statement as to the language to which each word belongs”.

Amendment of regulation 7

4. Regulation 7 of the principal Regulations is amended by substituting for the word “or” the word “and”.

Amendment of regulation 8

5. Regulation 8 of the principal Regulations is amended by substituting for subregulation (2) the following

subregulation:

“(2) The address indicated shall be a complete and current address so as to ensure prompt postal delivery,

including the electronic mail address, website address, facsimile and telephone number, if any, or any

effective mode, manner or form of communication prevailing”.

Amendment of regulation 10

6. Regulation 10 of the principal Regulations is amended—

(a) in paragraph (1)(d), by substituting for the words “, electrostatic process, photo offset and microfilming,” the

words “and any associated reproduction in any form, mode or manner,”;

(b) in subregulation (2), by substituting for the words “six copies” the words “one copy”; and

(c) in subregulation (4), by deleting the word “tracings”.

Amendment of regulation 14

7. Regulation 14 of the principal Regulations is amended—

(a) in subregulation (3), by substituting for the word “or” appearing after the word “class” the word “and”; and

(b) by substituting for subregulation (6) the following subregulation:

“(6) Where the earlier application is in a language other than the national language or the English

language, the applicant shall, within three months from the date of the request by the Registrar

referred to in subregulation (5), furnish a certified or verified translation to the satisfaction of the

Registrar of the earlier application in the national language or the English language.”.

Amendment of regulation 18

8. Subregulation 18(4) of the principal Regulations is amended by deleting the words “a certificate of filing in the form of”.

Amendment of regulation 20

9. Subregulation 20(2) of the principal Regulations is amended by substituting for the words “common

certificate of registration for” the words “Certificate of Registration for each of”.

Amendment of regulation 32

10. Regulation 32 of the principal Regulations is amended by inserting after subregulation (4) the following

subregulation:

“(5) The Registrar may, for the purpose of subregulation (2), require the agent to produce evidence of his

authority.”.

Amendment of regulation 33

11. Regulation 33 of the principal Regulations is amended—

(a) in paragraph (3)(b), by deleting the word “or”;

(b) in paragraph (3)(c), by substituting for the full stop the words “;or”; and

(c) by inserting after paragraph (3)(c) the following paragraph:

(d) has had at least seven (7) years of experience in the field of industrial property by virtue of

being an ex-officer of the Office.”.

Substitution of regulation 42

12. The principal Regulations are amended by substituting for regulation 42 the following regulation:

Filing and service of documents and things

42. (1) Any document or thing required or authorized by the Act or these Regulations to be filed at the

Office or with the Registrar shall be delivered by hand to the Office during its normal business hours or be

sent to the Registrar by post.

(2) Sending by post shall be deemed to be effected by properly addressing, preparing and posting a letter

containing the document or thing, with the prepaid postage on it, to the Registrar at the Office and the

document or thing shall be deemed to have been received at the time when the document or thing is

actually received by the Office.

(3) The filing of a document or thing with the Office shall be deemed to be effected at such time as it is received by the Office and is recorded as received.”.

New regulations 42a and 42b

13. The principal Regulations are amended by inserting after regulation 42 the following regulations:

Electronic filing of documents and things

42a. (1) The Registrar may provide a service for the electronic filing of the document or thing required or

authorized by the Act or these Regulations to be filed at the Office or with the Registrar.

(2) A person who intends to use the service provided under subregulation (1) shall comply with the terms

and conditions as may be specified by the Registrar, either generally by notice published in the official

website or, in any particular case, by notice, including through electronic means, to the person desiring to

use such service.

(3) A document or thing which is electronically filed under this regulation shall be deemed to be effected

at such time as that document or thing is accepted by the electronic filing system.

(4) Where any accompanying document or thing is not capable of being filed electronically, such

accompanying document or thing may be delivered or sent to the Registrar in the manner specified in

regulation 42, subject to such terms and conditions as the Registrar may specify.

Terms and conditions for electronic filing

42b. (1) Without limiting the generality of subregulation 42a(2), the terms and conditions for electronic

filing shall include the following:

(a) the procedure to be complied with for the electronic filing of documents and things;

(b) the format or media in which a document or thing is to be recorded or stored for purposes of electronic

filing;

(c) the manner of authenticating a document or thing which is required to be stamped, signed, sealed or

certified, including the requirement for a digital signature of the person filing the document or

thing; and

(d) the actions to be taken in the event of an interruption in the process of performing an electronic filing.

(2) Notwithstanding regulation 42a, the Registrar may refuse to accept or register any document or thing

which is filed electronically, if—

(a) the information contained in such document or thing is not capable of being displayed in a legible form;

(b) the electronic record of such document or thing is not capable of being stored in the electronic filing system;

(c) the electronic record of such document or thing appears to the Registrar to be altered, damaged,

incomplete or forged; or

(d) any of the terms or conditions on electronic filing specified by the Registrar is not complied with.”.

Substitution of regulation 45

14. The principal Regulations are amended by substituting for regulation 45 the following regulation:

“45. Any request for—

(a) certified or uncertified copies of any entry or document in the Register;

(b) certified or uncertified extracts from any entry or document in the Register; or

(c) a Registrar’s Certification accompanied by certified copy of any entry or document in the Register;

shall be made on ID Form 14 accompanied by the prescribed fee.”.

Substitution of First Schedule

15. The principal Regulations are amended by substituting for the First Schedule the following Schedule:

¨First Schedule¨

FEES

(Regulation 3)

The following fees shall be paid in respect of applications, registrations and other matters under the Act. Such

fees must in all cases be paid before or at the time of doing the matter in respect of which they are paid.

Part I

Item No. Matters or

Proceedings

Form E-Filing

Fee

(RM)

Manual Fee

(RM)

1. Application for

the registration

of an industrial

design:

for a single

design

for each

additional

design specified

(Regulation 5)

Publication for

each view of the

representation

contained in the

application

ID FORM 1

480.00

480.00

200.00

500.00

500.00

200.00

(Regulations 10

and 22)

Item No. Matters or

Proceedings

Form E-Filing

Fee

(RM)

Manual Fee

(RM)

2. Application for

extension of the

period of

registration:

for second

period of—

(a) a single

industrial design

(b) each

additional

industrial

Design

for third period

of—

(a) a single

industrial design

(b) each

additional

industrial design

for fourth period

of—

(a) a single

industrial design

(b) each

additional

industrial design

for fifth period

of—

(a) a single

industrial design

(b) each

additional

industrial design

Surcharge shall

be payable

ID FORM 2

780.00

780.00

780.00

780.00

780.00

780.00

780.00

780.00

200.00

800.00

800.00

800.00

800.00

800.00

800.00

800.00

800.00

200.00

under

subsection 25(3)

in respect of

period of grace

in making

application for

the extension of

period of

registration:

for each period

of one month

(not exceeding

six months in

total)

(Regulation 23)

3. Request to

restore a

registered

industrial design

(Regulation 24)

Surcharge

payable under

subregulation

24(4):

for each period

of one month

(not exceeding

twelve months

in total)

ID FORM 3 780.00

100.00

800.00

100.00

4. Notice of

opposition to

the restoration

of an industrial

design

(Regulation 25)

ID FORM 4 280.00 300.00

5. Application to

record the

assignment,

transmission or

other operation

of law to:

(a) a registered

industrial design

or;

(b) an

application for

registration of

an industrial

design

(Regulation 26)

ID FORM 5

280.00

for each

design

280.00

for each design

300.00

for each

design

300.00

for each

design

Item No. Matters or

Proceedings

Form E-Filing

Fee

(RM)

Manual Fee

(RM)

6. Application for

rectification of

the Register or

request for

revocation of

registration

(Regulation 27)

ID FORM 6 580.00 600.00

7. Submission of a

copy of an

application to

Court

(Regulation 28)

ID FORM 7 Free Free

8. Notice of order

of Court for

rectification of

the Register

(Regulation 29)

ID FORM 8 180.00 200.00

9. Request for

amendment of

an application

for registration

of an industrial

design or a

registered

industrial design

(Regulation 30)

ID FORM 9 180.00 200.00

10. Appointment or

change of agent

and change of

address for

service

(Regulations 32

and 40)

ID FORM 10 80.00

(For each

application

of industrial

design)

100.00

(For each

application

of industrial

design)

11. Application for

registration as

an Industrial

Designs Agent

[Subregulation

33(2)]

ID FORM 11 1,280.00 1,300.00

12. Application for

extension of

registration as

an Industrial

Designs Agent

[Subregulation

33(7)]

ID FORM 12 580.00 600.00

13. Request for

extension of

time:

for each period

of one month

(not exceeding

three months in

ID FORM 13 280.00

300.00 for

each month

300.00

300.00 for

each month

total)

(Regulation 43)

14. Request for

certified or

uncertified

copies of or

extract from

entries,

documents, etc.:

(a) for certified

copy or extract;

(b) for

uncertified copy

or extract; or

(c) Registrar’s

Certification

accompanied

with certified

copy or extract

(Regulation 45)

ID FORM 14 10.00 per

page

5.00 per

page

100.00 per

Certificate

20.00 per page

for copy or

extract

10.00 per

page

5.00 per

page

100.00 per

Certificate

20.00 per page

for

copy or extract

Part II

OTHER FEES REQUIRED UNDER THE ACT

Item No. Matters or Proceedings Fee (RM)

1. Request to conduct public

search

20.00 per hour

2. Computer print-out

(a) black and white

(b) in colour

5.00 per page

20.00 per page”.

Amendment of Second Schedule

16. The Second Schedule to the principal Regulations is amended—

(a) by substituting for the words “MINISTRY OF DOMESTIC TRADE AND CONSUMER AFFAIRS,

MALAYSIA” wherever appearing the words “INTELLECTUAL PROPERTY CORPORATION OF

MALAYSIA”;

(b) by deleting the words “INTELLECTUAL PROPERTY DIVISION,” wherever appearing”;

(c) by substituting for ID FORM 1 the following form:

ID FORM 1

INTELLECTUAL PROPERTY CORPORATION OF MALAYSIA

Industrial Designs Act 1996 Industrial Designs Registration Office

Industrial Designs Regulations 1999

(Section 14 and Regulation 5)

APPLICATION FOR REGISTRATION OF AN INDUSTRIAL DESIGN

__________________________________________________________________

Application number (For official use only):

1. Full name and address of/each applicant:

(Names of individuals including all partners in a firm shall be given in full. Underline the surname or family name. For a

corporate body give its company name) If the applicant is a corporate body, give country/state of incorporation.

___________________________________________________________________

2. Full name and address of the author:

___________________________________________________________________

3. Name of agent (if applicable):

Address for service in Malaysia to which correspondence should be sent:

(If agent is appointed, Form ID 10 shall be submitted together with this form)

_____________________________________________________________ 4. Name the particular article or set of articles to which the design applies:

___________________________________________________________________

5. Classification:

Enter the class and subclass number in accordance with the International Classification for Industrial Designs.

___________________________________________________________________

6. View(s):

Enter the number(s) and which view(s) to be gazetted.

___________________________________________________________________

7. Multiple applications: Enter the number of industrial design applied for registration

(if any):

___________________________________________________________________

8. Association:

Enter the application number or registration number of the earlier design with which the applicant seeks association under

section 23 and regulation 17.

___________________________________________________________________

9. Declaration of priority (if any):

Give the convention country and filing date of any previous application made abroad from which priority is claimed under

section 17.

Country:

Date of filing:

___________________________________________________________________

10. If the details in column 9 apply, and the previous application was not made in the name(s) given in column 1, give

details of the instrument (for example, deed of assignment) which gives the applicant the right to apply for registration.

Include appropriate name(s) and date(s):

(If this information is not given at the time this Form is filed, you must submit it before this industrial design is registered).

___________________________________________________________________

11. Divisional application: Give the number and filing date of any relevant earlier application whose filing date is claimed

under section 20.

Number:

Date of filing:

___________________________________________________________________

12. Declaration:

I/We apply to register the industrial design shown in the accompanying representations. I/We declare that I/We the applicant(s) who claim(s) to be the owner(s) of the design in relation to the article or set of articles specified

in column 4 and to be the owner of any designs right that exists in this industrial design. I/We also declare in respect of

any entry in column 9 that the application made in the convention country upon which the applicant relies is the first

application made for registration of the design in a convention country.

–––––––––––––––––––– ––––––––––––––––––––

Signature(s) Date

Name of applicant/agent

(Delete whichever is not applicable)

___________________________________________________________________

13. Name and telephone number of person to contact in Malaysia:

_________________________________________________________________;”;

(d) by substituting for ID FORM 2 the following form:

ID FORM 2

INTELLECTUAL PROPERTY CORPORATION OF MALAYSIA

Industrial Designs Act 1996 Industrial Designs Registration Office

Industrial Designs Regulations 1999

(Subsection 25(2) or Subsection 50(2)

and Regulation 23)

APPLICATION FOR EXTENSION OF THE PERIOD OF REGISTRATION

1. Application number (For official use only):

___________________________________________________________________

2. Registered industrial design number:

___________________________________________________________________

3. Full name and address of the/each owner:

___________________________________________________________________

4. Is this application for an extension for a second, third, fourth or fifth period?

Please state which period.

___________________________________________________________________

5. When is the extension fee due?

How many period of grace do you want if the application for extension is late?

___________________________________________________________________

6. If the registration contains more than one industrial design and extension is not applied for in respect of all of them, state

the number of each industrial design for which extension is applied for:

_____________________________________________________________ 7. Extension fee RM

Surcharge (if applicable) RM

Total RM enclosed

___________________________________________________________________

8. Full name and address in Malaysia to which the certificate of extension is to be sent:

___________________________________________________________________

9. Declaration:

I/We apply for an extension of the period of registration of the above registered industrial design.

(Delete whichever is not applicable)

–––––––––––––––––––– ––––––––––––––––––––

Signature(s) Date

___________________________________________________________________

10. Name and telephone number of person to contact in Malaysia:

_________________________________________________________________;”;

(e) by substituting for ID FORM 3 the following form:

ID FORM 3

INTELLECTUAL PROPERTY CORPORATION OF MALAYSIA

Industrial Designs Act 1996 Industrial Designs Registration Office

Industrial Designs Regulations 1999

(Section 26 and Regulation 24)

REQUEST TO RESTORE A REGISTERED INDUSTRIAL DESIGN

___________________________________________________________________

1. Application number (For official use only):

___________________________________________________________________

2. Registration number:

___________________________________________________________________

3. Full name and address of the/each owner:

___________________________________________________________________

4. Full name and address of the/each applicant applying for restoration:

(Leave blank if this information is the same as given in column 3)

___________________________________________________________________

5. Name of agent (if applicable):

Address for service in Malaysia to which correspondence should be sent:

_____________________________________________________________ 6. If this application is being made by the owner(s), do you want the address in column 5 to replace the address for service

currently on the Register?

(State YES or NO)

___________________________________________________________________

7. Grounds for this application:

(enclose supporting evidence in the form of statutory declaration(s) or affidavit(s) with this Form)

8. Restoration fee:

RM ___________ (enclosed)

___________________________________________________________________

9. Declaration:

I/We apply for the above registered industrial design to be restored.

(Delete whichever is not applicable)

–––––––––––––––––––– ––––––––––––––––––––

Signature(s) Date

___________________________________________________________________

10. Name and telephone number of person to contact in Malaysia:

_________________________________________________________________;”;

(f) by substituting for ID FORM 4 the following form:

ID FORM 4

INTELLECTUAL PROPERTY CORPORATION OF MALAYSIA

Industrial Designs Act 1996 Industrial Designs Registration Office

Industrial Designs Regulations 1999

(Section 26 and Regulation 25)

NOTICE OF OPPOSITION TO THE RESTORATION OF AN INDUSTRIAL DESIGN

___________________________________________________________________

1. Application number (For official use only):

___________________________________________________________________

2. Registration number:

___________________________________________________________________

3. Full name and address of the/each applicant/owner as currently appears on the Register or application:

___________________________________________________________________

4. Full name and address of the/each person making this notice: 5. Grounds for this notice:

___________________________________________________________________

6. Name of agent (if applicable):

Address for service in Malaysia to which correspondence should be sent:

___________________________________________________________________

7. Declaration:

(Name of each signatory should be entered, and status if relevant)

I/We confirm that a copy of this Notice has been given on the applicant for the restoration of the above industrial design in

accordance with subsection 26(3).

(Delete whichever is not applicable)

–––––––––––––––––––– ––––––––––––––––––––

Signature(s) Date

––––––––––––––––––––

Name(s)

8. Name and telephone number of person to contact in Malaysia:

_________________________________________________________________;”;

(g) by substituting for ID FORM 5 the following form:

ID FORM 5

INTELLECTUAL PROPERTY CORPORATION OF MALAYSIA

Industrial Designs Act 1996 Industrial Designs Registration Office

Industrial Designs Regulations 1999

(Section 30 and Regulation 26)

APPLICATION TO RECORD THE ASSIGNMENT, TRANSMISSION OR OTHER OPERATION OF LAW TO:

(i) A REGISTERED INDUSTRIAL DESIGN, OR;

(ii) AN APPLICATION FOR REGISTRATION OF AN INDUSTRIAL DESIGN

___________________________________________________________________

1. Application number (For official use only):

___________________________________________________________________

2. Application or registration number(s): Give the total number if more than one.

___________________________________________________________________

3. Full name and address of the/each applicant/owner as currently recorded on the Register or application(s):

_____________________________________________________________ 4. Full name and address of the/each person making this application:

(Leave blank if this information is the same as given in column 3)

___________________________________________________________________

5. Grounds for this application:

Give details of the assignment, transmission or operation of law affecting the rights in the or in each application or

registered industrial design specified in column 2 including its date and the names of all the parties involved, including

for corporate bodies the country and, if appropriate, state of incorporation. A certified copy of the assignment,

transmission or other operation of law shall be enclosed.

___________________________________________________________________

6. Name of agent (if applicable):

Address for service in Malaysia to which correspondence should be sent:

___________________________________________________________________

7. Declaration:

(Name of each signatory should be entered, and status if relevant)

I/We declare that where industrial design right exists in the/in each industrial design mentioned in column 2, the person(s)

entitled to any interest which the applicant is seeking to register by this application is/are also entitled to the

corresponding interest in the industrial design right.

(Delete whichever is not applicable)

–––––––––––––––––––– ––––––––––––––––––––

Signature(s) Date

________________________

Name of signatory(s):

___________________________________________________________________

8. Name and telephone number of person to contact in Malaysia:

_________________________________________________________________;”;

(h) by substituting for ID FORM 6 the following form:

ID FORM 6

INTELLECTUAL PROPERTY CORPORATION OF MALAYSIA

Industrial Designs Act 1996 Industrial Designs Registration Office

Industrial Designs Regulations 1999

(Subsection 24(3) or 27(2) and Regulation 27)

APPLICATION FOR RECTIFICATION OF THE REGISTER OR REQUEST FOR REVOCATION OF

REGISTRATION

___________________________________________________________________

1. Application number (For official use only):

_____________________________________________________________ 2. Registration number:

___________________________________________________________________

3. Full name and address of the/each owner:

___________________________________________________________________

4. Full name and address of the person making the application/request on this form:

(Leave blank if this information is the same as given in column 3)

___________________________________________________________________

5. Name of agent (if applicable):

Address for service in Malaysia to which correspondence should be sent:

___________________________________________________________________

6. Explain the nature of your application:

___________________________________________________________________

7. Declaration:

I/We apply/request for rectification of the Register/revocation of registration.

(Delete whichever is not applicable)

–––––––––––––––––––– ––––––––––––––––––––

Signature(s) Date

8. Name and telephone number of person to contact in Malaysia:

_________________________________________________________________;”;

(i) by substituting for ID FORM 7 the following form:

ID FORM 7

INTELLECTUAL PROPERTY CORPORATION OF MALAYSIA

Industrial Designs Act 1996 Industrial Designs Registration Office

Industrial Designs Regulations 1999

Paragraph 24(1) (a) or Subsection 24(3) or

Paragraph 27(1) (a), (b) or (c) and Regulation 28)

SUBMISSION OF A COPY OF AN APPLICATION TO COURT

___________________________________________________________________

1. Application number (For official use only):

___________________________________________________________________

2. Registration number:

_____________________________________________________________ 3. Full name and address of the/each applicant/owner as currently appears on the Register or application(s):

___________________________________________________________________

4. Full name and address of the/each person making this application: (Leave blank if this information is the same as given in

column 3)

___________________________________________________________________

5. Name of agent (if applicable):

Address for service in Malaysia to which correspondence should be sent:

___________________________________________________________________

6. Declaration:

(Name of each signatory should be entered and status if relevant)

I/We submit a copy of the application to Court.

(Delete whichever is not applicable)

–––––––––––––––––––– ––––––––––––––––––––

Signature(s) Date

________________________

Name of signatory(s):

7. Name and telephone number of person to contact in Malaysia:

________________________________________________________________;”;

(j) by substituting for ID FORM 8 the following form:

“ID FORM 8

INTELLECTUAL PROPERTY CORPORATION OF MALAYSIA

Industrial Designs Act 1996 Industrial Designs Registration Office

Industrial Designs Regulations 1999

[Regulations 1999 (Paragraph 24(1)(d) and Regulation 29)]

NOTICE OF ORDER OF COURT FOR RECTIFICATION OF THE REGISTER

___________________________________________________________________

1. Application number:

(For official use only)

___________________________________________________________________

2. Registration number:

___________________________________________________________________

3. Full name of the/each owner:

___________________________________________________________________

4. Full name and address of each person making this application:

___________________________________________________________________

5. Name of agent (if applicable):

Address for service in Malaysia to which correspondence should be sent:

___________________________________________________________________

6. Details of the rectification required to be made:

(An office copy of the order of Court shall be attached)

___________________________________________________________________

7. Declaration:

I/We submit a copy of the notice of order of the Court for rectification of the Register

(Delete whichever not applicable)

–––––––––––––––––––– ––––––––––––––––––––

Signature(s) Date

________________________

Name of signatory(s):

________________________________________________________________;”;

(k) by substituting for ID FORM 9 the following form:

ID FORM 9

INTELLECTUAL PROPERTY CORPORATION OF MALAYSIA

Industrial Designs Act 1996 Industrial Designs Registration Office

Industrial Designs Regulations 1999

(Section 19 or 40 and Regulation 30)

REQUEST FOR AMENDMENT OF AN APPLICATION FOR REGISTRATION OF AN INDUSTRIAL DESIGN

OR A REGISTERED INDUSTRIAL DESIGN

1. Application number (For official use only):

___________________________________________________________________

2. Application or registration number(s):

___________________________________________________________________

3. Full name and address of the/each applicant/owner as currently recorded on application(s) or the Register:

___________________________________________________________________

4. Full name and address of person(s) making the request:

(Leave blank if this information is the same as given in column 3)

___________________________________________________________________

5. Give details of new name, if applicable:

(enclose proof of any change of names; example copy of Certificate of Incorporation on change of name) ___________________________________________________________________

6. Give details of amendment to be made, if applicable:

___________________________________________________________________

7. If this request is to alter the name or address, does the alteration apply to all application for registration of an industrial

design or registered industrial designs in that name?

(State YES or NO)

___________________________________________________________________

8. Name of agent (if applicable):

Address for service in Malaysia to which correspondence should be sent:

___________________________________________________________________

9. Declaration:

I/We apply for amendment of the application for registration of an industrial design/registered industrial design.

(Delete whichever is not applicable)

–––––––––––––––––––– ––––––––––––––––––––

Signature(s) Date

___________________________________________________________________

10. Name and telephone number of person to contact in Malaysia:

_________________________________________________________________;”;

(l) by substituting for ID FORM 10 the following form:

ID FORM 10

INTELLECTUAL PROPERTY CORPORATION OF MALAYSIA

Industrial Designs Act 1996 Industrial Designs Registration Office

Industrial Designs Regulations 1999

(Sections 14 or 45 and Regulation 32 and 40)

APPOINTMENT OR CHANGE OF AGENT AND CHANGE OF ADDRESS FOR SERVICE

1. Application or registration number(s):

___________________________________________________________________

2. Full name and address of the/each applicant/owner:

___________________________________________________________________

3. Full name and address of present agent (if applicable):

___________________________________________________________________

4. Agent’s registration number (if applicable):

_____________________________________________________________ 5. Name and address of new agent:

___________________________________________________________________

6. Registration number of new agent:

___________________________________________________________________

7. Declaration:

I request that all communication concerning the above application or registration shall be sent to the address specified in

column 5, which is the address for service.

–––––––––––––––––––– ––––––––––––––––––––

Signature(s) Date

Name of applicant(s):

Designation:

___________________________________________________________________

8. Name and telephone number of person to contact in Malaysia

_________________________________________________________________;”;

(m) by substituting for ID FORM 11 the following form:

ID FORM 11

INTELLECTUAL PROPERTY CORPORATION OF MALAYSIA

Industrial Designs Act 1996 Industrial Designs Registration Office

Industrial Designs Regulations 1999

(Sections 47 and Subregulation 33(2))

APPLICATION FOR REGISTRATION AS AN INDUSTRIAL DESIGNS AGENT

___________________________________________________________________

1. Application number(s):

(For official use only)

___________________________________________________________________

2. Full name and address of the applicant:

___________________________________________________________________

3. Nationality:

___________________________________________________________________

4. Permanent residence or principal place of business (including current telephone and fax number):

___________________________________________________________________

5. Qualifications:

(attach copies of qualifications certified by Commissioner for Oaths.)

_____________________________________________________________ 6. Experience:

(submit details of your experience in the form of statutory declaration.)

___________________________________________________________________

7. Declaration:

I apply for registration as an Industrial Design Agent. I also declare that all information given above is true and correct.

–––––––––––––––––––– ––––––––––––––––––––

Signature(s) Date

_________________________________________________________________;”;

(n) by substituting for ID FORM 12 the following form:

ID FORM 12

INTELLECTUAL PROPERTY CORPORATION OF MALAYSIA

Industrial Designs Act 1996 Industrial Designs Registration Office

Industrial Designs Regulations 1999

(Section 47 and Sub regulation 33(7))

APPLICATION FOR EXTENSION OF REGISTRATION AS AN INDUSTRIAL DESIGNS AGENT

___________________________________________________________________

1. Registration number of agent:

___________________________________________________________________

2. Full name and address of the applicant:

___________________________________________________________________

3. Nationality:

___________________________________________________________________

4. Permanent residence or principal place of business (including telephone and fax number):

___________________________________________________________________

5 Qualifications:

___________________________________________________________________

6. Extension fee: ______ RM ______ enclosed.

_____________________________________________________________ 7. Declaration:

I apply for an extension of the registration as an Industrial Design Agent. I also declare that all information given above is

true and correct.

–––––––––––––––––––– ––––––––––––––––––––

Signature(s) Date

_________________________________________________________________;”;

(o) by substituting for ID FORM 13 the following form:

ID FORM 13

INTELLECTUAL PROPERTY CORPORATION OF MALAYSIA

Industrial Designs Act 1996 Industrial Designs Registration Office

Industrial Designs Regulations 1999

(Section 43 and Regulation 43)

REQUEST FOR EXTENSION OF TIME

___________________________________________________________________

1. Application number (For official use only):

___________________________________________________________________

2. Full name and address of the/each applicant:

___________________________________________________________________

3. Name of agent (if applicable):

Address for service in Malaysia to which correspondence should be sent:

___________________________________________________________________

4. How long an extension do you want? State 1, 2 or 3 months.

___________________________________________________________________

5. Completion date:

(State the completion date of the act or thing in respect of which the extension of time is requested, regard to the extension

of time in column 4)

___________________________________________________________________

6. Declaration:

I/We request for an extension of time to the date stated in column 5.

(Delete whichever is not applicable)

–––––––––––––––––––– ––––––––––––––––––––

Signature(s) Date

______________________________________________________________ 7. Name and telephone number of person to contact in Malaysia:

_________________________________________________________________;”;

(p) by substituting for ID FORM 14 the following form:

ID FORM 14

INTELLECTUAL PROPERTY CORPORATION OF MALAYSIA

Industrial Designs Act 1996 Industrial Designs Registration Office

Industrial Designs Regulations 1999

(Sections 9 and 47 and Regulation 45)

REQUEST FOR CERTIFIED OR UNCERTIFIED COPIES OF OR EXTRACT FROM ENTRIES, DOCUMENTS,

ETC.

1. Application or registration number:

___________________________________________________________________

2. Full name and address of the/each applicant/owner of the industrial design as currently appears on the Register or

application(s):

___________________________________________________________________

3. Request for:

(a) certified copy of or extract; or [ ]

(b) uncertified copy of or extract; or [ ]

(c) Registrar’s Certification accompanied [ ]

with certified copy or extract

(Tick whichever is applicable)

How many copies do you require? [ ]

___________________________________________________________________

4. Full name and address in Malaysia to which copies, extracts or certificate be sent:

(If you have any special delivery/collection instructions, please give details)

___________________________________________________________________

5. Have you enclosed the documents to be certified? If not, the Office will, if possible, prepare photocopies.

___________________________________________________________________

6. Declaration:

I/We request for the document(s) which is ticked in column 3 and shall be sent to the name and address given in column 4.

(Delete whichever not applicable)

–––––––––––––––––––– ––––––––––––––––––––

Signature(s) Date

______________________________________________________________ 7. Name and telephone number of person to contact in Malaysia:

_________________________________________________________________.”.

Substitution of Third Schedule

17. The Principal Regulations are amended by substituting for the Third Schedule the following Schedule:

“Third Schedule

Industrial Designs Act 1996

Industrial Designs Regulations 1999

(Regulation 20)

INTELLECTUAL PROPERTY CORPORATION OF MALAYSIA

Industrial Designs Registration Office

CERTIFICATE OF REGISTRATION OF AN INDUSTRIAL DESIGN

Registration Number :

Registration Date :

Expiry Date :

Article or set of article :

Name and address :

In pursuance of and subject to the provisions of the Industrial Designs Act 1996 and the Industrial Designs Regulations 1999, the

Industrial Design of which the representation(s) is or are attached has been registered from the date of registration in the name(s) and

address(es) as above.

Date of Issuance: .......................................................................

( )

Registrar of Industrial Designs Malaysia”.

Substitution of Fourth Schedule

18. The principal Regulations are amended by substituting for the Fourth Schedule the following Schedule:

“Fourth Schedule

Industrial Designs Act 1996

Industrial Designs Regulations 1999

(Regulation 23)

INTELLECTUAL PROPERTY CORPORATION OF MALAYSIA

Industrial Designs Registration Office

CERTIFICATE OF EXTENSION OF PERIOD

OF REGISTRATION OF AN INDUSTRIAL DESIGN

IN THE MATTER OF an application to extend the period of registration of a Registered Industrial Design as the following: Registration Number :

Name of Owner :

Expiry Date :

I, THE UNDERSIGNED being an officer authorized to sign and issue certificates on behalf of the Registrar, certify that this industrial

design registered under the Industrial Design Act 1996 continues in force with the period of registration extended for a further five years

as above.

Date of Issuance: ...........................................................

( )

Acting for the

Registrar of Industrial Designs”.

Made 26 January 2012

[KPDN(BUU)(PU2)26/5/19; PN(PU2)588/III]

DATO’ SRI ISMAIL SABRI BIN YAAKOB

Minister of Domestic Trade, Cooperatives and Consumerism


التشريعات يُعدّل (1 نصوص) يُعدّل (1 نصوص) يُنفّذ (1 نصوص) يُنفّذ (1 نصوص)
لا توجد بيانات متاحة.

ويبو لِكس رقم MY077