COMMISSION DECISION
of 27 September 2000
concerning the guidance notes for risk assessment outlined in AnnexIII of Directive 90/219/EEC
(notified under document number C(2000) 2736)
(Text with EEA relevance)
(2000/608/EC)
THE COMMISSION OF THE EUROPEAN COMMUNITIES,
Having | regard | to | the | Treaty | establishing | the | European | |||
---|---|---|---|---|---|---|---|---|---|---|
Community, | ||||||||||
Having | regard | to | Council | Directive | 90/219/EEC | on | the |
contained use of genetically modified micro-organisms (1), as last amended by Council Directive 98/81/EC (2), and in particular Article 5 paragraph 2 thereof,
Whereas:
HAS ADOPTED THIS DECISION:
Article 1
When an assessment of the contained uses of genetically modified micro-organisms is made under Article 5 of Directive 90/219/EEC, the annexed guidance notes for risk assessment shall be used to supplement Annex III of the Directive.
Article 2
This Decision is addressed to the Member States.
Done at Brussels, 27 September 2000.
For the Commission
Margot WALLSTRÖM
Member of the Commission
ANNEX
GUIDANCE NOTES FOR RISK ASSESSMENT OUTLINED IN ANNEX III OF COUNCIL DIRECTIVE 90/219/EEC
The full risk assessment process consists of two procedures outlined below:
Identify potential harmful properties (hazard) of the GMM and allocate the GMM to an initial class (class 1 to class 4) taking into account the severity of the potential harmful effects.
and
Assessment of possibility of harmful effects occurring by consideration of exposure (both human and environmentan( �/span> taking into account the nature and scale of the work, with containment measures appropriate to the initial class allocated.
Determination of final classification and containment measures required for the activity. Confirm final classification and containment measures are adequate by revisiting Procedure 1.
3. PROCEDURE 1
The risk assessment process requires the identification of any potentially harmful properties of the GMM as a result of the genetic modification or any alteration of the recipient organisms' existing properties. Potentially harmful properties associated with the GMM must be determined. This should be done by consideration of the recipient organism, the donor organism, the characteristics and location of the inserted genetic material and any vector. It is important to appreciate that the genetic modification of a micro-organism can affect its ability to cause harm to human health and the environment. Genetic modifications can result in a decreased, unchanged or increased ability to cause harm.
3.3. Initial classification of the GMM
Points 3 to 5 of Annex III indicate that the first stage of the risk assessment process for a GMM is to identify the potential harmful properties of the GMM, to determine an initial classification for the GMM. This is achieved by the identification of hazards associated with the recipient, donor organism, vector and insert where appropriate. This process can be aided by taking into account the general characteristics for class 1 set out in point 4 of Annex III and appropriate up to date national and international classification schemes (including Directive 90/679/EEC (1) and amendments thereof). The corresponding set of containment and other protection measures indicated in Annex IV are used as a reference set of measures to determine whether more stringent containment and control measures are required to control identified harmful effects.
The risk of harm arising from any harmful property of the GMM is obtained by the consideration of the severity of the harm and any biological properties (e.g. disabling mutations) which limit the possibility of harm occurring. The estimation of the severity of the harmful effects is performed independently of the possibility of the harmful effect occurring. The severity of any possible harm is determined by considering what the result could be, not whether it is likely to occur in the particular case. For instance, for a pathogen you would estimate how serious the disease would be assuming that the susceptible species was infected. The allocation of the GMM to an initial class includes consideration of severity. Classification schemes, such as that in Directive 90/679/EEC, take severity into account. However many schemes are based only on either human health or environmental considerations. Care must be taken to ensure that the severity of harmful effects on human health and the environment from the GMM have been fully considered.
3.4. Assessment of possibility of harmful effects occurring
The key factor that affects the possibility of a harmful event occurring is the level and nature of exposure of humans or the environment to a particular GMM. Exposure is, in most cases, of primary importance to risk assessment as it will often determine whether a harmful effect could occur. The possibility of humans or the environment being exposed to a GMM depends upon what operations are being carried out (for example the scale of the operations) and the containment measures appropriate to the initial classification as determined in points 5 and 6applied to the work.
Points 7(ii) and (iii) of Annex III requires that the characteristics of the operation be taken into account when making the final classification and selection of control measures. The nature and scale of the activity need to be considered in order to estimate the possibility of exposure of humans and the environment and will also affect the choice of appropriate risk management procedures.
The characteristics of the operation that could affect the risk assessment and so should be taken into account as appropriate include the actual activities to be undertaken, work practices, scale and containment measures applied.
The assessment should especially take into account the question of disposal of waste and effluents. Where appropriate, the necessary safety measures should be implemented in order to protect human health and the environment.
3.4.1. Nature of activities to be undertaken
The degree of risk and application of control measures to reduce that risk from the GMM to an appropriate level will be influenced by the nature of the activities to be undertaken, since these will affect human and environmental exposure and hence possibility of harm occurring.
The nature of the activities will also determine which table in Annex IV has the most appropriate containment and control measures to be considered.
In practice, for laboratory scale work where the effect of standard laboratory procedures on exposure are well known, detailed risk assessment of each individual procedure would be unlikely to be required unless a highly hazardous organism was being used. More detailed consideration however may be necessary for non-routine procedures or procedures which might have a significant effect on the degree of risk, for example, procedures which generate aerosols.
3.4.2. Concentration and scale
The density of a culture can lead to a risk of exposure to high concentrations of the GMM, particularly in downstream processing operations. The effect of concentration on the possibility of a harmful event occurring must be considered.
Scale is also a factor that must be taken into account in the risk assessment. Scale may be in terms of the absolute volume of a single operation or the frequent repetition of a process, because both could give rise to an increased possibility of exposure if the containment and control measures failed and thus affect the possibility of a harmful event occurring.
(1) JO L 374 du 31.12.1990, p. 1.
While large scale does not necessarily mean high risk, increased scale may lead to an increased possibility of exposure both in terms of the number of humans and the amount of environmental exposure that might occur in the event of containment failure.
Scale will also influence which table in Annex IV has the most appropriate containment and control measures to be considered.
3.4.3. Culture conditions
In many contained use activities, the culture conditions are rigorously contained to protect the work, however, the nature and design of the growth vessels or other culture equipment will also influence the degree of risk to human health and the environment. Highly engineered and sealed fermentation vessels can significantly reduce exposure and hence risk from a GMM. Consideration of reliability and possible failure rates for such equipment is important where failure could lead to high levels of exposure to harmful GMMs. Where such loss is reasonably foreseeable, additional containment measures may be required. The standard operating procedures of individuals undertaking work with cultured GMMs such as centrifugation or sonication will have a significant impact on the effectiveness of any containment measures employed.
In combination with physical culture conditions that act as containment measures, both biological and chemical measures that are employed to protect the work can also contribute significantly to the containment measures that may be required. Examples of biological containment could well be auxotrophic mutants that require specific growth factors to be supplied to grow. Examples of chemical containment measures could be disinfectant solutions maintained in drainage systems.
Point 7(i) of Annex III requires that the characteristics of the environment likely to be exposed and the severity of the effect be taken into account when assessing the possibility of harmful effects occurring and their severity.
There are a number of aspects to this consideration of the environment that are important, such as the extent and nature of environmental exposure and whether there are biota which can be adversely affected by the particular GMM in the area exposed.
The following factors should be considered, as appropriate, when assessing how the characteristics of the receiving environment will affect the possibility that the potentially harmful effect will be realised and hence the level of risk and selection of control measures.
3.4.3.1. Environment likely to be exposed
The environment likely to be exposed will in most cases probably be limited to the workplace environment and the area immediately surrounding the facility, but depending on the specific characteristics of the contained use and the facility, a wider environment may need to be considered. The extent of the environmental exposure may be influenced by the nature and scale of the activity, but consideration should also be given to all possible modes of transmission into the wider environment. These can include physical modes (such as local drains, watercourses, waste disposal, air movement) and biological vectors (such as movement of infected animals and insects).
3.4.3.2. Presence of susceptible species
The possibility of harm actually occurring will depend on whether there are susceptible species, including humans, animals or plants, in the environment that is likely to be exposed.
3.4.3.3. Whether the environment can support the survival of the GMM
The extent to which the GMM can survive and persist in the environment is a strong consideration in the risk assessment. The possibility of harm occurring will be significantly reduced if a GMM cannot survive in the environment to which it might gain access.
When all potentially harmful characteristics have been reviewed for their severity and possibility of occurrence, with the effect of the containment and control measures indicated by the initial classification of the recipient considered, the final classification and containment measures for the GMM can be determined. In considering the final classification and containment measures, the initial classification should be revisited to determine if it was correct bearing in mind the activities and characteristics of the operations proposed. A comparison of the initial classification and associated containment measures with the final class and containment requirements can give rise to three results:
4.2. Confirmation of adequacy of final containment measures
Once the proposed final classification and containment conditions have been determined, the level of human and environmental exposure should be reassessed (Procedure 1). This should confirm that the possibility of any harmful effects occurring, taking into account the nature and scale of the work and the proposed containment conditions are acceptably low. When this has been done the risk assessment process has been completed.
In accordance with Article 6(2) of the Directive, if the nature or scale of the work changes significantly or new scientific or technical knowledge becomes available, such that the risk assessment is no longer adequate, the risk assessment must be reviewed in the light of the changes. Any alteration in containment conditions indicated as a result of the review of the risk assessment must be applied forthwith to maintain adequate protection for human health and the environment.
The classification and the containment and control measures identified in the risk assessment as required to adequately contain the GMM during the proposed operations, leads to the classification of the contained use activities into classes 1 to 4. The containment and controlmeasures for each class of contained use are detailed in Annex IV of the Directive.
The classification of the contained use activities for the GMM defines the administration requirements.
If there are any uncertainties in the final classification and containment conditions, it is advisable to contact the competent authority.