REGULATIONS
ON INDUSTRIAL DESIGNS
REGULATIONS SUPPLEMENTING THE INDUSTRIAL DESIGN REGULATIONS*
NN 72/2004, in force from June 1, 2004.
*NN 1172007, in force from November 14, 2007
Zagreb, December 2007
REGULATIONS ON INDUSTRIAL DESIGNS
I. GENERAL PROVISIONS
SUBJECT MATTER OF THE REGULATIONS
Article 1
These Regulations shall in detail provide for specific questions contained under the Law on Industrial Designs in relation to the procedures conducted before the State Intellectual Property Office (hereinafter referred to as: the Office).
II. INDUSTRIAL DESIGN APPLICATION
CONTENTS OF INDUSTRIAL DESIGN APPLICATION
Article 2
(1) The industrial design application shall contain:
1. The express request for the registration of an industrial design;
2. the name and forename or the corporate name of the applicant;
3. the address of the applicant (street, street number, postal code, town, the State); the application may also indicate different means of communication with the applicant, such as the telephone number, facsimile number or electronic mail address;
4. the nationality of the applicant, or the name of the State in which a legal entity has head office;
5. a representation of a design in accordance with Article 3 to 11 under the Regulations, or a specimen of a design pursuant to Article 12 under the Regulations;
6. indication of the product in which a design is intended to be incorporated or to which a design is intended to be applied; the indication of the product shall clearly distinguish the nature of the product and enable the classification of each product in one class pursuant to the Locarno Agreement Establishing an International Classification for Industrial Designs (hereinafter: the International Classification); for this purpose preferably using the terms
appearing on the list of products under the International Classification;
7. information identifying the authorised representative and a valid power of attorney, if the applicant has a representative; the provisions under subparagraph 2.,
3.and 4.of the present paragraph shall apply accordingly to the representatives;
8. mention of the appointment of a common representative where a common application has been filed;
9. indication of a total number of designs where a multiple application has been filed;
10. the signature of the applicant or common representative, or the signature or seal of the representative, if the applicant has any.
(2) An industrial design application may contain:
1. Description in detail explaining a representation or a specimen of a design; a description may not exceed hundred words, it shall
exclusively relate to those features appearing in a reproduction or on a specimen of a design and it may not contain statements relating to the novelty, individual character of the design or its technical value;
2. request for deferment of publication of the registered industrial design specifying the period for which deferment has been requested;
3. classification of the product
(indication of the class) in which a design is intended to be incorporated or to which a design is intended to be applied in accordance with the International Classification;
4. information identifying a designer or a team of designers; the provisions
under paragraph (1) subparagraph
2., 3. and 4.of this Article shall apply accordingly to the designers;
5. indication that a designer or a team of designers waive the right to be cited;
1
6. information and the evidence of priority in accordance with Articles
29 and 30 under the Law on
Industrial Designs;
7. indication that the application resulted from separation of a multiple application and the number of the original application.
(3) Information pursuant to paragraph (1) and (2) under this Article shall be indicated on the prescribed industrial design application form being an integral part of the Regulations (the form D-1), except for the following contents of the application and the evidence appended thereto:
1. A representation or a specimen of a design,
2. valid power of attorney if the applicant has a representative,
3. statement on the appointment of the
common representative; the provisions pursuant to paragraph (1) subparagraph 2,3 and 4 under this Article shall likewise apply when indicating information identifying the common representative,
4. statement of a designer or a team of designers that they waive their right to be cited, or a statement signed in manuscript by the applicant that a designer or a team of designers waive their right to be cited,
5. evidence of priority.
(4) Evidence on the paid fees and costs of procedure shall be attached to the industrial design application, in accordance with special provisions.
(5) The Office shall submit to the party at her/his request a specimen of D-1 form and all the other forms prescribed under the Regulations.
REPRESENTATION OF DESIGN
Article 3
(1) The representation of a design filed under an industrial design application may consist of a graphic or a photographic reproduction of a design, either in black and white or in colour.
(2) The representation of a design shall be filed on the prescribed D-2 form being an integral part of the Regulations. The form D-2 shall be of DIN A4 format, and
the space used for the reproduction of a design shall not be larger than 26,2 x 17 cm and not smaller than 4 x 4 cm. A
margin of at least 2,5 cm shall be on the left-hand side of the sheet of paper. At the top of each sheet of paper the total number of designs under the application, the ordinal number of the design and the number of views shall be indicated pursuant to Article 8 paragraph 3.of the Regulations, and the applicant or the common representative. Graphic or photographic representations of a design shall be pasted or printed by electronic means on the space intended for the representation of designs.
(3) Where a design is disclosed by more than one graphic or photographic representation, the required number of copied forms shall be filed under the application, and each sheet of paper shall be numbered on the lower right- hand side margin. Each specimen of the form may have only one graphic or photographic representation of the design. All the attached and numbered sheets of paper shall constitute one specimen of the form D-2.
Article 4
(1) Graphic or photographic representations of a design shall have right angles and straight edges, may not be folded, marked or connected with the form by perforations.
(2) No explanatory text or wording may be represented on the object of the graphic reproduction of a design, or near the object.
(3) Graphic or photographic representations of a design shall disclose only a design of the product with no other object, accessory, person or animal.
Article 5
(1) A graphic representation of a design may be attached in original or in electronic print out of such an original produced by electronic means or procedures, provided the quality thereof is identical to the original. The graphic representation of a design shall be adequate for reproducing.
(2) The graphic representation of a design shall be of a quality production by means of drawing materials or by electronic means permitting continuous lines (uninterrupted), and having clearly distinguished characteristics. A three- dimensional design shall preferably be
2
represented in view/perspective containing nuances and shades in order to underline three-dimensional features.
(3) The graphic representation of a design shall be reproduced on the white sheet of paper.
(4) The graphic representation of a design shall not be a technical drawing, the subject matter of which is represented on cross-section or containing axis lines and dimensions.
Article 6
(1) Under an industrial design application may be filed a photographic representation of a design or a reproduction thereof, produced by electronic means or procedures. Photographic representations and reproductions thereof shall be of a quality so that the characteristics of the design are clearly distinguished and adequate for reproducing. For the representation of a design no photocopy or photographic representation may be attached.
(2) A design shall be represented on a neutral and a single colour background.
(3) The attached photographic representation may not be retouched (with Indian ink, ink or correcting fluid).
Article 7
(1) Where an industrial design application refers to a design consisting in a repeating surface pattern (ornament, pattern and similar), the representation of such a design shall disclose the complete pattern and a sufficient portion of the repeating surface.
(2) Where an industrial design application refers to a design consisting in a typographic typeface, the representation of such a design shall consist in a string of all the letters of the alphabet, in both upper and lower case, and of all the Arabic numerals from zero to nine, with a text of five lines produced using that typeface, both letters and numerals being in the size pitch 16.
Article 8
(1) Where one graphic or photographic representation may not disclose all the novel and individual characteristics of the design, graphic or photographic representations shall be of adequate
number for this purpose, but a representation shall contain no more than six different views of the design. Where a specific portion of the attached representation of a design is not sufficiently distinguished, such a portion may be represented to the enlarged scale.
(2) Where the same design is represented with several graphic or photographic reproductions, they shall be each numbered separately, the numbering shall consist of numerals separated by a point, the numeral to the left-hand side of the point indicating ordinal number of the design, that to the right-hand side indicating the number of the view (example:1.1, 1.2, 1.3).
Article 9
(1) Industrial design shall be registered and published in colour where a design in colour is filed under the industrial design application, and where a representation is filed in black and white technique, a design shall be registered and published in that technique.
(2) For publishing an industrial design and issuing a Certificate for industrial design in colour, the best reproduction technique available at the Office shall be used. In the event of any dispute relating to nuances or colour shades in which a design is reproduced, the design of the product shall be characterised by an original representation of the design filed under the industrial design application.
Article 10
Under a procedure for the registration of an industrial design the right position of a design shall be considered such, in which the design is represented on the form D-2 filed under the industrial design application.
Article 11
(1) In case of a multiple application for each design a separate graphic or photographic representation shall be submitted.
(2) Where in the multiple application the same design is represented by several graphic or photographic representations, all the representations relating to the same design shall be numbered
separately in the manner specified under
3
Article 8, paragraph 2.of the Regulations (example:1.1, 1.2, 1.3 for the first design and 2.1, 2.2, 2.3 for the second design).
SPECIMEN OF DESIGN
Article 12
(1) Where deferment for publication of a registered industrial design was requested under the application, and the subject matter of the application is a two-dimensional design, the representation of a design may be replaced by a specimen thereof.
(2) An industrial design application and a specimen of a design shall be concurrently submitted to the Office.
(3) The specimen of a design shall not exceed 26,2 x 17 cm in size, 100 gram in weight or 5mm in thickness, and shall be submitted pasted on the form D-2.
(4) Specimens that are perishable or dangerous to store shall not be filed.
(5) The specimen of a design shall be filed in three copies to the Office, and in the event of a multiple application three
copies of the specimen shall be filed for each design.
(6) Where an industrial design application is relating to a design pursuant to Article
7, paragraph (1) under the Regulations, the specimen of a design shall disclose
the complete pattern and a sufficient portion of the repeating surface.
DIVISION OF MULTIPLE APPLICATION
Article 13
(1) Where an application is a multiple application requesting registration of several designs, and the products in which a design is intended to be incorporated or to which it is intended to be applied may not be classified in only one class pursuant to the International Classification, the Office shall call upon the applicant to divide the application and to pay full amount of the fees and costs of procedure in accordance with special provisions.
(2) The Office shall, under the call pursuant to paragraph (1) of this Article, instruct the applicant for which design under a multiple application a new industrial design application shall be filed, or new applications in the event of more than one design, which shall be classified
under more than one class pursuant to the International Classification.
(3) Where the applicant for a multiple application proceeds according to the call of the Office within the time limit specified pursuant to Article 32 paragraph (2) and (3) under the Law on Industrial Designs, the Office shall issue a decision on division of a multiple application.
(4) Where the applicant for a multiple application fails to proceed within the set time limit upon the call of the Office, the application shall be rejected by a decision.
III. REGISTERS
CONTENTS OF THE REGISTER OF INDUSTRIAL DESIGN APPLICATIONS Article 14
In the register of industrial design applications the following information shall be entered:
1. Number of an industrial design application and in the event of a multiple application the number of each single design included in the multiple application and the indication of a total number of designs;
2. date of filing of the industrial design application;
3. information identifying the applicant pursuant to Article 2, paragraph (1) and sub-paragraph 2.,3.and 4.under the Regulations;
4. representation of a design or information that a representation was replaced by a specimen of a design;
5. indication of the product in which a design is intended to be incorporated or to which it is intended to be applied;
6. classification and sub-classification number pursuant to the International Classification;
7. information identifying the accredited representative pursuant to Article 2 paragraph (1) sub- paragraph 7.under the Regulations, if the applicant has any;
8. information identifying the common
representative pursuant to Article 2 paragraph (3) subparagraph 3.under the Regulations in the event of a common application;
4
9. information on deferment of publication indicating the period for deferment, where deferment has been requested;
10. information of priority where priority has been requested, such as :
- the date and number of the first application and the name of the State in which the application
was filed in the event of the
Union priority right, or
- the name of exhibition, the opening and closing date thereof and the date of the first disclosure of the product in which the design is incorporated or on which the design is applied in the event of exhibition priority right,
11. application, which is the subject matter of the registration resulting from a separation of a multiple application, shall contain information on the priority of the original application;
12. information identifying a designer or a team of designers pursuant to Article 2, paragraph (2) subparagraph 4 of the Regulations, or the information that a designer or a team of designers waive the right to be cited pursuant to Article 2 paragraph (3) subparagraph 4 under the Regulations;
13. information that a description of a design or a specimen of a design was filed under the application pursuant to Article 2, paragraph (2) subparagraph 1 of the Regulations;
14. information on the changes relating to an industrial design application indicating the date of the entry of changes in the register;
15. data on the paid fees and costs of procedure in accordance with special
provisions.
CONTENTS OF THE REGISTER OF INDUSTRIAL DESIGNS
Article 15
In the register of industrial designs the following information shall be entered:
1. The number of the industrial design application and the number of each single design included in a multiple application;
2. date of filing of the industrial design application;
3. number of the industrial design and the date of a decision for the registration of the industrial design and the entry of the industrial design into the register;
4. information identifying the holder of industrial design; the provisions under Article 2, paragraph (1) and subparagraph 2.,3.and 4.of the
Regulations shall apply accordingly to a holder of an industrial design;
5. representation of a design or information that the representation of a design was replaced by a specimen;
6. the name of a product or a part of the product in which a design is incorporated or to which a design is applied
7. the classification and sub- classification number pursuant to the
International Classification;
8. information identifying the accredited representative pursuant to Article 2, paragraph (1) subparagraph 7. under the Regulations, if the holder of industrial design has any;
9. the date of publishing industrial design in the Office Official Gazette;
10. information on deferment of the publication of industrial design and the date of expiration of the period for deferred publication, where deferment has been requested;
11. information on the granted priority right, such as;
- the date and number of the first
application and the name of the State in which the application was filed in the event of the Union priority right, or;
- the name of exhibition, opening and closing date thereof, the
date of the first disclosure of the product in which a design is incorporated or on which a design is applied in the event of an exhibition priority right
12. information identifying a designer or
a team of designers pursuant to Article 2, paragraph (2), sub- paragraph 4 of the Regulations, or information that a designer or a team of designers waive their right to be cited pursuant to Article 2,
5
paragraph (3), sub-paragraph 4 under the Regulations;
13. information that a description of a design or a specimen of a design is filed under an application pursuant to Article 2 paragraph (2), sub- paragraph 1.of the Regulations;
14. validity date for the protection of industrial design, and information on
the renewal of protection of industrial design;
15. information on the changes relating to the registered industrial design indicating the date of changes entered in the Register
16. information on the expiration of an industrial design and the basis thereof;
17. information on a declaration of invalidity of an industrial design.
18. data on the paid fees and costs of
procedure in accordance with special provisions.
IV. PUBLICATION OF INDUSTRIAL DESIGN AND ISSUE
OF CERTIFICATE
FOR INDUSTRIAL DESIGN
PUBLICATION OF INDUSTRIAL DESIGN
Article 16
(1) Information on the registered industrial design shall be published in the Office Official Gazette, as follows:
1. Number of the industrial design and the date of a decision on the registration of the industrial design and the entry of the industrial design in the register;
2. number of the industrial design application and the date of filing thereof;
3. information identifying the holder of the industrial design (the name, forename, address and nationality in the event of a natural person, or the
corporate name and the seat in the event of a legal entity);
4. representation of the design;
5. name of a product or a part of the product in which the design is incorporated or to which the design is applied,
6. classification and sub-classification number under the International Classification;
7. information identifying the accredited representative if the holder of industrial design has any (the name, forename and address of a representative in the event of a natural person, or the corporate name and head office in the event of a legal entity);
8. information identifying a designer or a team of designers (the name, forename and address) except in the event a designer or a team of designers have waived their right to be cited);
9. information on the granted priority right, such as:
- date and number of the first application and the name of the State in which the application was filed in the event of the Union priority right, or
- the name of exhibition, opening and closing date thereof, the date of the first disclosure of the product in which a design is incorporated or on which a design is applied in the event of
an exhibition priority right.
(2) Where deferment of publication is requested, in the Office Official Gazette shall be published information pursuant to paragraph (1), sub-paragraph 1.,2.,3. and 7. under this Article, and information that publication deferment has been requested. Neither a representation of a design nor any particulars identifying the appearance of the design shall be published. On the expiration of the period for deferment, the industrial design shall be published in the first Office Official Gazette issued following the expiry of the mentioned period.
(3) Where a representation of design characteristics is disputable due to technical limitations in publishing a graphic or a photographic reproduction, a design of the product shall be characterised by the original of a design representation filed under the industrial design application, to which any interested person shall have the right for inspection after its publication. Where a deferment of publication is requested, any interested person shall have the right for inspection only of bibliographical data concerning the
6
industrial design provided for under paragraph (2) of this Article, and shall have no right for inspection of a representation nor of any particulars relating to the appearance of the design.
(4) Information pursuant to paragraph (1) of this Article shall be indicated by INID- codes to identify bibliographical data of an industrial design established by the
World Intellectual Property Organisation
(hereinafter: the INID-codes).
(5) The Office shall republish the industrial design where at initial publication substantial deficiencies were found.
CONTENTS OF INDUSTRIAL DESIGN CERTIFICATE Article 17
(1) Industrial design certificate shall contain the following information:
1. Number of the industrial design and the date of a decision on the registration of industrial design and the entry of the industrial design into the register;
2. number of the industrial design application and the date of filing thereof;
3. information identifying the holder of the industrial design (the name, forename, address and nationality in
the event of a natural person, or the corporate name and head office in the event of a legal entity);
4. representation of a design;
5. the name of a product or a part of the product in which the design is incorporated or to which the design is applied,
6. classification and sub-classification number under the International Classification;
7. information identifying a designer or
a team of designers (the name, forename, address) except in the event a designer or a team of designers have waived their right to be cited;
8. information on the granted priority right, such as:
- date and number of the first application and the name of the State in which the application was filed in the
event of the Union priority right, or;
9. name of exhibition, opening and closing date thereof, the date of the first disclosure of the product in which the design is incorporated or on which the design is applied in the event of exhibition priority,
10. date of publication of the industrial design in the Office Official Gazette;
11. information on deferment of the publication of the industrial design, where deferment was requested.
(10) Information under paragraph (1) of this
Article shall be indicated by INID-codes. (11) Where the industrial design is registered
under a multiple application the Office shall issue a unique certificate or a single certificate for each registered industrial design, dependent on the request of the holder of the industrial design.
V. ENTRY OF CHANGES INTO REGISTERS
REQUEST FOR THE ENTRY OF CHANGES INTO REGISTER Article 18
(1) The changes brought about after the date of filing the industrial design application and the changes on the registered industrial design shall be entered in the registers on the basis of a decision issued by the Office and at the request of a party for the registration of changes.
(2) The entry of changes into the Register of industrial design applications or into the Register of industrial designs shall be lodged by a written request on the prescribed form being an integral part of the Regulations (D-3 form).
(3) The form D-3 is intended for filing the following requests:
1. request for the entry of changes of information identifying the applicant or the holder of an industrial design, brought about after the date of filing an industrial design application or after the registration thereof;
2. request for the entry of a licence;
3. request for the entry of the right in rem and execution;
4. request for the entry of transfer of rights;
5. request for the entry of other information relating to the legal
7
status of the holder of an industrial design or a design as such.
CONTENTS OF REQUEST FOR ENTRY OF CHANGES Article 19
(1) The request for the entry of changes into the register shall contain:
1. Express request for the entry of changes into the register;
2. number of the industrial design application or number of the industrial design;
3. information identifying the applicant or the holder of the industrial design pursuant to Article 2, paragraph (2), subparagraph 2., 3. and 4 under the Regulations;
4. information identifying the person filing the request; the provisions
pursuant to Article 2, paragraph (1), subparagraph 2., 3.and 4.under the Regulations shall apply accordingly to the person filing the request;
5. information identifying the
accredited representative, in compliance with Article 2, paragraph (1) subparagraph 7.under the Regulations if the person filing the request has any;
6. information on the type of a change which is a subject matter of the registration, and the contents of the change indicating all the new information for which the entry is requested;
7. signature of the person filing the request, or the signature and seal of the representative, if any.
(2) The request pursuant to paragraph (1)
of this Article shall be accompanied by:
1. .Evidence of the legal basis for a change for which the entry into the register has been requested;
2. valid power of attorney if the person filing the request has a representative;
3. evidence of the paid fees and costs of procedure in accordance with
special provisions.
VI. RENEWAL OF PROTECTION FOR INDUSTRIAL DESIGN
APPLICATION FOR RENEWAL OF PROTECTION FOR INDUSTRIAL DESIGN Article 20
(1) Information on the renewal of protection for industrial design shall be entered in the Register of industrial designs based on a decision issued by the Office at the request of the party applying for the renewal of protection.
(2) The application for the renewal of protection for the industrial design shall be filed on the prescribed form, which is an integral part of the Regulations (D-4 form).
CONTENTS OF APPLICATION FOR RENEWAL OF PROTECTION FOR INDUSTRIAL DESIGN
Article 21
(1) The application for the renewal of protection for the industrial design shall contain:
1. Express request for the renewal of protection for industrial design;
2. number of an industrial design or the number of industrial designs under a multiple application for which a renewal of protection has been requested;
3. information identifying the holder of an industrial design; the provisions under Article 2, paragraph (1), subparagraph 2.,3.and 4.of the Regulations shall apply accordingly to the holder of an industrial design;
4. information identifying the accredited representative, pursuant to Article 2, paragraph (1), subparagraph 7.under the Regulations, if the applicant has any;
5. signature of the applicant or the signature and seal of the representative, if the applicant has any.
(2) The application for the renewal of protection for industrial shall be
accompanied by:
1. Valid power of attorney if the applicant has a representative,
2. evidence on the paid fees and costs of procedure in accordance with special provisions.
8
VII. REQUEST FOR DECLARATION OF INVALIDITY OF INDUSTRIAL DESIGN
CONTENTS OF A REQUEST FOR A DECLARATION OF INVALIDITY OF INDUSTRIAL DESIGN
Article 22
(1) The request for a declaration of invalidity of the industrial design shall contain:
1. Express request for a declaration of invalidity of an industrial design,
2. number of an industrial design in relation to which the request is filed, and information identifying the holder thereof (the name and address in the event of a natural person, or the corporate name and head office in the event of a legal entity),
3. information identifying the applicant; the provision under Article 2, paragraph (1), subparagraph 2, 3 and 4 of the Regulations shall apply
accordingly to the applicant;
4. information identifying the accredited representative pursuant to Article 2, paragraph (1), subparagraph 7.under the Regulations, if the applicant has any,
5. the reasons for filing the request pursuant to Article 9 under the Law on Industrial Designs referring to the facts and evidence on which the request is grounded,
6. signature of the applicant, or the
signature and seal of the representative, if the applicant has any.
(2) The request pursuant to paragraph (1)
of this Article shall be accompanied by:
1. Evidence on the reasons for declaration of invalidity of an industrial design,
2. valid power of attorney if the applicant has a representative,
3. evidence on the paid fees and costs of procedure in accordance with
special provisions.
(3) Where the request pursuant to paragraph (1) of this Article is filed according to Article 9, subparagraph 2.of the Law on Industrial Designs for the reasons of non-compliance of the
registered industrial design with the requirements of novelty referred to in Article 4, or individual character under Article 5 of the Law on Industrial Designs, under a request shall be filed a representation of an earlier design and appropriate documentation proving that the design was made available to the public before the date of filing the application for an industrial design, or if priority right was claimed before the date of the granted priority.
(4) Where the request pursuant to paragraph (1) of this Article is filed pursuant to Article 9, subparagraph
4.under the Law on Industrial Designs, under the request shall be filed a representation of an earlier design and information necessary to identify the type of the design, and documentation proving that the person filing the request is the applicant or the holder of prior right thus being authorised for filing the request for a declaration of invalidity of the industrial design, in accordance with Article 44, paragraph (6) under the Law on Industrial Designs.
(5) Where the request pursuant to paragraph (1) of this Article is filed according to Article 9, subparagraph 5.of the Law on Industrial Designs, under the request shall be filed a representation of a distinctive sign and information necessary to identify the distinctive sign, and documentation proving that the person filing the request is the holder of a prior right on a distinctive sign thus being authorised for filing a request for a declaration of invalidity of the industrial design in compliance with Article 44, paragraph (7) under the Law on Industrial Designs.
(6) Where the request pursuant to paragraph (1) of this Article is filed according to Article 9, subparagraph 6.of the Law on Industrial Designs, under the request shall be filed the evidence identifying a copyrighted work as the subject matter of infringement and the kind of unauthorised use of this work, and the documentation proving that a person filing a request is the author or the holder of a copyright thus being authorised for filing the request for a declaration of invalidity of an industrial design pursuant to Article 44, paragraph (7) under the Law on Industrial Designs.
9
VIII. EXPIRATION OF INDUSTRIAL DESIGN
Article 23
(1) Expiration of the industrial design shall be entered in the Register for industrial designs based on a decision issued by the Office.
(2) In the Office Official Gazette shall be published the following information on the expiration of the industrial design:
1. Number of the industrial design,
(3) . information identifying the holder of the industrial design (name, forename, address and nationality, in the event of a natural person, or the corporate name and head office in the event of a legal entity),
1. expiration date of the industrial design.
IX. FINAL PROVISIONS
EXPIRATION OF OTHER PROVISIONS
Article 24
Notwithstanding the provisions pursuant to Article 59, paragraph (1) and (4) under the Law on Industrial Designs, upon the entry into force of this Regulations, the provisions under the Regulations on Industrial Designs (“Official Gazette”, number 146/99) and the pertinent forms as an integral part thereof, shall expire.
ENTRY INTO FORCE OF THIS REGULATIONS Article 25
The present Regulations shall enter into force on the date of its publication in the “Official Gazette”.
10
REGULATIONS
SUPPLEMENTING THE INDUSTRIAL DESIGN REGULATIONS
Article 1
In the Industrial Design Regulations (“Official Gazette”, No. 72/2004), in Article 5, below paragraph 4, paragraph 5 is added to which reads:
“(5) Without prejudice to the provision of paragraph 2 of this Article, the representation of a design may contain dashed lines, if such lines mark the visible parts of the design for which the protections is not sought in the proceedings in question.”
Article 2
In Article 14, below subparagraph 15, subparagraphs 16 and 17 are added which read:
”16. date when the procedural order on dismissing the industrial design application or the date the decree dismissing the registration of the industrial design was rendered, if such decisions were rendered,
17. data on the appeal against the decision of the Office, if the appeal was submitted, being:
– data on the appellant; the provisions of
Article 2, paragraph 1, subparagraphs 2,
3 and 4 of these Regulations apply
mutatis mutandis to the appellant,
– the number and date of the decision of the Office which is appealed,
– the date on which the appeal is received,
– data on the attorney, if the appellant has one; the provisions of Article 2, paragraph 1, subparagraph 7 of these Regulations apply mutatis mutandis to the attorneys in the appeal proceedings,
– data on paid fees and costs of proceedings for submitting the appeal,
– date and type of decision rendered on the appeal.”
Article 3
In Article 15, below subparagraph 18, subparagraph 19 is added which reads:
“19. data on the appeal against the decision of the Office, id the appeal was submitted, being:
– data on the appeal; the provisions of
Article 2, paragraph 1, subparagraphs 2,
3 and 4 of these Regulations apply
mutatis mutandis to the appellant,
– the number and date of the decision of the Office which is appealed,
– the date on which the appeal is received,
– data on the attorney, if the appellant has one; the provisions of Article 2,
paragraph 1, subparagraph 7 of these
Regulations apply mutatis mutandis to the attorneys in the appeal proceedings,
– data on paid fees and costs of proceedings for submitting the appeal,
– date and type of decision rendered on the appeal.”
Article 4
Below Article 22, new chapter VIII is added, the title and Article 22a which read:
“VIII APPEAL
Appeal proceedings
Article 22a
(1) Appeal proceedings are initiated by submitting the appeal to the Board of Appeal.
(2) The appeal referred to in paragraph 1 of this Article shall contain:
1. an express indication that the appeal is being submitted,
2. data on the appellant (for natural persons: name, surname and address, and for legal persons: the company name and the seat),
3. the classification number of the
decree which is appealed,
4. the registration number of the industrial design application or the registration number of the industrial design,
5. an indication on whether the decree is appealed in its entirety or certain parts thereof, and explained reasons for the appeal, together with the necessary evidence.
(3) The proof on the paid administrative fee and costs of proceedings shall be submitted along with the appeal, in accordance with the special regulation.
(4) The appeal shall be submitted in two copies directly or shall be sent to the Office by mail; thought the Secretariat
11
referred to in Article 91, paragraph 5 of the Patent Act (“Official Gazette”, Nos.
173/2003, 87/2005 and 76/2007) the Office will forward the appeal to the Board of Appeal.”
The former chapter VIII is renumbered into chapter IX.
Article 5
Below Article 23, chapter is added, the title and Article 23a which read:
“X COMMUNITY DESIGN APPLICATION”
Submitting a Community design application thought the Office
Article 23a
(1) If the application for registration of the Community design (hereinafter: “Community design application”) is submitted through the Office, the applicant shall submit the proof on payment of the administrative fee and costs related to forwarding the Community design application to the Office for Harmonisation
in the Internal Market along with the appeal, in accordance with the special regulation.
(2) If the prescribed administrative fees and costs related to forwarding the Community design application have not been when the appeal was submitted, and if they are not paid and the proof on their payment is not submitted within 14 days from the day of receipt of the Community design application in the Office, it shall be assumed that the applicant has withdrew the Community design application.”
The former chapter IX is renumbered into chapter XI.
Article 6
These Regulations shall enter into force on the day of its publication in the “Official Gazette”, with the exception of Articles 2, 3 and 4 of these Regulations which shall enter into force on 1 June 2008 and Article 5 of these Regulations which shall enter into force on the day the Republic of Croatia accedes to the full membership of the European Union.
12