Prepared by the Office of Parliamentary Counsel, Canberra
Designs Regulations 2004
Statutory Rules No. 117, 2004
made under the
Designs Act 2003
Compilation No. 19
Compilation date: 1 October 2020
Includes amendments up to: F2020L00997
Registered: 12 October 2020
Authorised Version F2020C00913 registered 12/10/2020
About this compilation
This compilation
This is a compilation of the Designs Regulations 2004 that shows the text of the
law as amended and in force on 1 October 2020 (the compilation date).
The notes at the end of this compilation (the endnotes) include information
about amending laws and the amendment history of provisions of the compiled
law.
Uncommenced amendments
The effect of uncommenced amendments is not shown in the text of the
compiled law. Any uncommenced amendments affecting the law are accessible
on the Legislation Register (www.legislation.gov.au). The details of
amendments made up to, but not commenced at, the compilation date are
underlined in the endnotes. For more information on any uncommenced
amendments, see the series page on the Legislation Register for the compiled
law.
Application, saving and transitional provisions for provisions and
amendments
If the operation of a provision or amendment of the compiled law is affected by
an application, saving or transitional provision that is not included in this
compilation, details are included in the endnotes.
Editorial changes
For more information about any editorial changes made in this compilation, see
the endnotes.
Modifications
If the compiled law is modified by another law, the compiled law operates as
modified but the modification does not amend the text of the law. Accordingly,
this compilation does not show the text of the compiled law as modified. For
more information on any modifications, see the series page on the Legislation
Register for the compiled law.
Self-repealing provisions
If a provision of the compiled law has been repealed in accordance with a
provision of the law, details are included in the endnotes.
Authorised Version F2020C00913 registered 12/10/2020
Designs Regulations 2004 i
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Contents
Chapter 1—Introductory 1 1.01 Name of Regulations ........................................................ 1
1.04 Interpretation .................................................................... 1
1.05 Convention country .......................................................... 1
1.06 Giving of documents by Registrar .................................... 2
Chapter 2—Design rights, ownership and registrable
designs 3 2.01 Certain things to be disregarded in deciding
whether a design is new and distinctive ............................ 3
Chapter 3—Design applications 4
Part 3.2—Applications 4 3.01 Minimum filing requirements ........................................... 4
3.02 Applications covering excluded designs ........................... 4
3.04 Publication of receipt of application ................................. 4
3.05 Filing date ......................................................................... 5
3.06 Priority date—designs disclosed in basic
applications....................................................................... 5
3.07 Certain basic applications to be disregarded ..................... 6
3.08 Priority date—excluded designs ....................................... 6
Part 3.3—Amendment or withdrawal of applications 7 3.09 Request for amendment of application ............................. 7
3.10 Disputes between applicants—requests for
determinations .................................................................. 7
3.11 Requests for direction specifying persons as
applicants or entitled persons............................................ 7
3.12 Publication of certain details of amended
applications....................................................................... 7
3.13 Withdrawal of designs and design applications ................ 7
Part 3.4—Lapsing of applications 9 3.14 Period within which application lapses............................. 9
3.15 Form of notice .................................................................. 9
Chapter 4—Registration or publication of designs 10
Part 4.2—Requests for registration or publication 10 4.01 Requests for registration or publication .......................... 10
4.02 Subsequent requests for registration—applications
in respect of more than 1 design ..................................... 10
4.03 Period within which replacements of request may
be made........................................................................... 10
Part 4.3—Registration 11 4.04 Formalities check—applications in respect of 1
design only...................................................................... 11
4.05 Formalities check—applications in respect of more
than 1 design................................................................... 11
Authorised Version F2020C00913 registered 12/10/2020
ii Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
4.06 Registrar must refuse to register certain designs............. 12
4.07 Period within which Registrar must register certain
designs after refusal ........................................................ 13
4.08 Certificate of registration and notice of registration ....... 13
4.09 Renewal of registration ................................................... 14
4.10 Surrender of registration ................................................. 14
4.11 Revocation of registration on surrender .......................... 14
4.12 Revocation of registration on grounds relating to
entitled persons ............................................................... 15
4.13 Notice of revocation of registration ................................ 15
4.14 Applications by entitled persons after revocation
following surrender of registration ................................. 15
Part 4.4—Publication 16 4.15 Publication of a design.................................................... 16
Chapter 5—Examination of designs 17 5.01 Requirements for request for examination of
design.............................................................................. 17
5.02 Grounds for revocation of registration of design ............ 17
5.03 Examination of design—procedures ............................... 17
5.04 Period in which examination of a design must be
completed........................................................................ 18
5.05 Amendment of registration ............................................. 19
5.06 Certificate of examination and notice of
examination .................................................................... 19
5.07 Revocation of registration after examination .................. 20
5.08 Material provided to Registrar ........................................ 20
Chapter 7—Jurisdiction and powers of courts 21 7.01 Application to court for compulsory licence................... 21
7.02 Revocation of registration after grant of
compulsory licence ......................................................... 21
Chapter 8—The Crown 22 8.01 Acquisition of design by the Commonwealth ................. 22
8.02 Period within which designs must be registered or
published after prohibition.............................................. 22
Chapter 9—The Register 23 9.01 Other particulars to be entered in the Register ................ 23
9.02 Inspection of Register ..................................................... 23
9.03 Amendments of Register to record changes of
ownership........................................................................ 23
9.04 Notice specifying amendments to Register ..................... 23
9.05 Correction of Register..................................................... 23
Chapter 10—Administration 25 10.01 Delegation by Registrar .................................................. 25
10.02 Costs (Act s 127) ............................................................ 25
Authorised Version F2020C00913 registered 12/10/2020
Designs Regulations 2004 iii
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Chapter 11—Miscellaneous 27
Part 11.2—Fees 27 11.01 Fees payable ................................................................... 27
11.02 Failure to pay—fee for filing a design application.......... 27
11.03 Failure to pay—fee for filing a request for
registration covering a further design ............................. 28
11.04 Failure to pay—fee payable by the registered
owner for filing a request for examination...................... 28
11.05 Failure to pay—fee payable by the registered
owner in relation to a request for examination filed
by another person............................................................ 28
11.06 Failure to pay—certain other fees for filing.................... 28
11.07 Failure to pay—fee for requesting a hearing................... 29
11.08 Failure to pay—fee for appearing at a hearing................ 29
11.09 Failure to pay—fees for requesting supply of
documents by the Registrar............................................. 29
11.09A Failure to pay—fees for requesting expedited
dispatch........................................................................... 29
11.10 Consequences if Registrar does not invite payment........ 30
11.11 Exemption from fees (Act s 149).................................... 30
11.12 Recovery of fees ............................................................. 30
Part 11.5—Extensions of time 31 11.13 Extensions of time for doing a relevant act..................... 31
11.14 Consequence of extension—notice of restoration........... 31
Part 11.6—Other 32 11.15 Agents (Act s 141) .......................................................... 32
11.16 Right of lien of registered patent attorneys (Act s
142)................................................................................. 32
11.18 Documents to be in English ............................................ 32
11.18A Publications relating to filing of documents or
evidence.......................................................................... 32
11.19 Service of documents...................................................... 32
11.21 Death of applicant or registered owner (Act s 146,
s 147) .............................................................................. 33
11.22 Exercise of discretionary powers by Registrar................ 33
11.23 Written submissions and oral hearings ........................... 34
11.24 Practice and procedure in relation to applications,
oppositions and other matters ......................................... 34
11.25 Giving of oral evidence................................................... 35
11.26 Declarations .................................................................... 35
11.27 Non compliance in relation to documents other
than design applications.................................................. 35
11.27A Consequences for evidence not meeting filing
requirements ................................................................... 36
11.28 Directions for actions not otherwise prescribed .............. 36
11.29 Acting for persons unable to act ..................................... 36
11.30 Requirements that cannot be complied with for
reasonable causes............................................................ 36
11.31 Review of decisions ........................................................ 37
Authorised Version F2020C00913 registered 12/10/2020
iv Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
11.32 Period for doing certain acts—office not open for
business........................................................................... 37
11.33 Days when office not open for business ......................... 37
11.34 Period for doing certain acts—acts to which
section 136A does not apply ........................................... 38
Chapter 12—Application, saving and transitional
provisions 39
Part 1—General 39 12.01 Conversion of transitional applications........................... 39
12.02 Former Designs Regulations—transitional ..................... 39
12.03 Designs excluded from transitional applications
that are not converted applications.................................. 39
12.04 Protection and compensation provisions—
transitional ...................................................................... 40
Part 2—Amendments made by particular instruments 41 12.05 Amendments made by the Intellectual Property
Legislation Amendment (Raising the Bar)
Regulation 2013 (No. 1).................................................. 41
Part 3—Amendments made by the Intellectual Property Laws
Amendment (Productivity Commission Response
Part 1 and Other Measures) Regulations 2018 42 12.06 Amendments made by Part 2 of Schedule 2 ................... 42
12.07 Amendments made by Part 3 of Schedule 2 ................... 42
12.08 Amendments made by Part 9 of Schedule 2 ................... 43
Schedule 2—Formal requirements 44 1 Fitness for reproduction .................................................. 44
2 Separate sheets................................................................ 44
3 Margins........................................................................... 44
4 Textual matter ................................................................. 44
5 Additional requirements for representations ................... 45
6 Photographs and digital images ...................................... 46
7 Electronic documents...................................................... 46
8 Scandalous matter ........................................................... 46
Schedule 3—Costs 47
Part 1—Costs 47
Part 2—Expenses and allowances 48
Division 1—Expenses 48
Division 2—Allowances 48
Schedule 4—Fees 49 1 Table of fees ................................................................... 49
Authorised Version F2020C00913 registered 12/10/2020
Designs Regulations 2004 v
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Endnotes 51
Endnote 1—About the endnotes 51
Endnote 2—Abbreviation key 52
Endnote 3—Legislation history 53
Endnote 4—Amendment history 55
Authorised Version F2020C00913 registered 12/10/2020
Authorised Version F2020C00913 registered 12/10/2020
Introductory Chapter 1
Regulation 1.01
Designs Regulations 2004 1
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Chapter 1—Introductory
1.01 Name of Regulations
These Regulations are the Designs Regulations 2004.
1.04 Interpretation
(1) In these Regulations:
Act means the Designs Act 2003.
approved form, for a provision in which the expression appears, means a form
approved by the Registrar for that provision.
basic application has the meaning given by subregulation 3.06(1).
designer has the same meaning as in paragraph 13(1)(a) of the Act.
excluded design has the same meaning as in section 23 of the Act.
expedited dispatch means a means of supplying documents that can reasonably
be expected usually to be faster than ordinary post.
further design means a design that is disclosed in a design application, but that
has not been identified, by the applicant, as being a separate design disclosed in
the application.
initial application has the same meaning as in section 23 of the Act.
Official Journal means the Official Journal of Designs periodically published by
the Registrar.
old Act means the Designs Act 1906.
old Regulations means the Designs Regulations 1982.
transitional application has the meaning given by subregulation 12.03(6).
(2) For these Regulations, a document is taken to be in the approved form if it
contains all the information that the form requires.
(3) A reference in these Regulations to:
(a) the giving of a notice or other document to the Registrar; or
(b) the making of a request or an application to the Registrar;
includes a reference to the filing of the notice, document, request or application.
1.05 Convention country
For the definition of Convention country in subsection 5A(1) of the Act, the
following countries are prescribed:
Authorised Version F2020C00913 registered 12/10/2020
Chapter 1 Introductory
Regulation 1.06
2 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(a) a foreign country that is a signatory to the Paris Convention for the
Protection of Industrial Property of 20 March 1883, as in force from time
to time;
(b) a foreign country that is a full member of the World Trade Organization.
Note 1: For signatories to the Paris Convention for the Protection of Industrial Property, see
www.wipo.int.
Note 2: For full members of the World Trade Organization, see www.wto.org.
1.06 Giving of documents by Registrar
(1) For these Regulations, the Registrar may give a document to a person by:
(a) making the document available to the person in an electronic form; and
(b) notifying the person that the document is available.
(2) If the Registrar gives a document to a person, the document is taken to have been
given to the person on the day the document is dated by the Registrar.
Authorised Version F2020C00913 registered 12/10/2020
Design rights, ownership and registrable designs Chapter 2
Regulation 2.01
Designs Regulations 2004 3
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Chapter 2—Design rights, ownership and registrable
designs
2.01 Certain things to be disregarded in deciding whether a design is new and
distinctive
(1) For paragraph 17(1)(a) of the Act, a prescribed circumstance is the publication or
use of the design at:
(a) an official or officially recognised international exhibition within the
meaning of:
(i) Article 11 of the Paris Convention for the Protection of Industrial
Property done at Paris on 20 March 1883, as in force for Australia on
the commencement of this subregulation; or
(ii) Article 1 of the Convention relating to International Exhibitions done
at Paris on 22 November 1928, as in force for Australia on the
commencement of this subregulation; or
(b) an international exhibition recognised by the Registrar by notice published
in the Official Journal before the exhibition begins.
(2) The circumstance mentioned in subregulation (1) is a prescribed circumstance
only if, at the time a design application is made in respect of the design:
(a) a notice, stating that the design has been exhibited, has been filed; and
(b) a document, issued by the authority responsible for the exhibition, that:
(i) identifies the design and the exhibition; and
(ii) states the date of opening of the exhibition; and
(iii) if the first publication or use of the design did not take place on that
date—states the date on which the first publication or use took place;
has been filed.
(3) For subsection 17(1) of the Act, the prescribed period is 6 months from the date
on which the first publication or use of the design took place.
Authorised Version F2020C00913 registered 12/10/2020
Chapter 3 Design applications
Part 3.2 Applications
Regulation 3.01
4 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Chapter 3—Design applications
Part 3.2—Applications
3.01 Minimum filing requirements
For subsection 21(2) of the Act, each of the following requirements is prescribed:
(a) the application must include information that indicates that what is filed is
intended to be a design application;
(b) the application must include information that:
(i) allows the identity of the applicant to be established; and
(ii) allows the applicant to be contacted;
(c) the application must include a representation, or information that appears to
be a representation, of each design.
3.02 Applications covering excluded designs
For subsection 23(2) of the Act, the prescribed period:
(a) begins immediately after the Registrar has received the request to amend
the initial application under section 28 of the Act to exclude the excluded
design or designs; and
(b) ends immediately before the earlier of:
(i) the lapse or withdrawal of the initial application; and
(ii) the registration, or publication under section 57 of the Act, of a design
disclosed in the initial application.
3.04 Publication of receipt of application
(1) For section 25 of the Act, the details prescribed in relation to each design
application that meets the minimum filing requirements are the following details
for each design disclosed in the application:
(a) the design number;
(b) the name of the applicant or the entitled person;
(c) the filing date of the application;
(d) if applicable:
(i) details about any basic application made in respect of the design; and
(ii) the design number that was allocated to the excluded design in the
initial application;
(e) if stated in the application—the product or products to which the design
relates.
Note: For a design application in respect of a design excluded from certain transitional
applications, see also regulation 12.03.
(2) The Registrar must publish the details in the Official Journal.
Authorised Version F2020C00913 registered 12/10/2020
Design applications Chapter 3
Applications Part 3.2
Regulation 3.05
Designs Regulations 2004 5
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
3.05 Filing date
For section 26 of the Act, the filing date of a design application is the day when
the application meets the minimum filing requirements.
Note: For the filing date of a converted application, see section 160 of the Act.
3.06 Priority date—designs disclosed in basic applications
(1) In this regulation:
basic application, in respect of a design, means an application for protection of
the design, being an application that is made in a Convention country in
accordance with these Regulations.
(2) For paragraph 27(1)(b) of the Act, if the design application is filed, within 6
months after the date on which the basic application was made, by:
(a) the applicant in the basic application; or
(b) the applicant’s assignee; or
(c) the legal personal representative of the applicant or of the applicant’s
assignee;
the prescribed date is the day when the basic application was made.
(3) If a copy of the basic application is not filed within 2 months after the Registrar
has made a request (if any) for a copy, subregulation (2) is taken not to apply to
the design.
Note: Under regulation 11.18, a document that is not in English must be accompanied by a
verified translation.
(4) For paragraph 27(1)(b) of the Act, if subregulation (2) does not apply to the
design, the prescribed date is the filing date of the design application.
(5) If 2 or more basic applications have been made in 1 or more Convention
countries, a reference to the basic application in subregulation (2) is taken to be a
reference to the earlier or earliest of those applications.
Note: Certain applications are to be disregarded for the purpose of this regulation—see
regulation 3.07.
(6) For subregulation (1), an application for protection in respect of a design is made
in a Convention country:
(a) if:
(i) an application for protection in respect of the design has been made
under the Hague Agreement Concerning the International Deposit of
Industrial Designs, done at The Hague on 6 November 1925; and
(ii) the application sought protection in the Convention country; or
(b) if:
(i) an application for protection in respect of the design has been made
under the Benelux Designs Convention, done at Brussels on
25 October 1966 (the Benelux Convention); and
Authorised Version F2020C00913 registered 12/10/2020
Chapter 3 Design applications
Part 3.2 Applications
Regulation 3.07
6 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(ii) the Convention country is a State (however described) that has
consented to be bound by the Benelux Convention and for which the
Benelux Convention is in force; or
(c) if:
(i) an application for protection in respect of the design has been made
under the terms of the Treaty Establishing the European Community,
done at Rome on 25 March 1957; and
(ii) the Convention country is a State (however described) that has
consented to be bound by the Treaty and for which the Treaty is in
force.
Note: For the priority date of a converted application, see section 160 of the Act.
3.07 Certain basic applications to be disregarded
(1) This regulation applies if:
(a) an application for protection in respect of a design has been made in a
Convention country in accordance with these Regulations; and
(b) the application has been withdrawn, abandoned or refused without
becoming open to public inspection; and
(c) the application has not been used as the basis for claiming a right of
priority in a Convention country under the law of that country
corresponding to regulation 3.06; and
(d) a later application for protection in respect of the design has been made by
the same applicant in the Convention country in which the earlier
application was made.
(2) The applicant may request the Registrar to disregard the earlier application for
the purpose of identifying the basic application referred to in
subregulation 3.06(2).
(3) If the applicant makes a request under subregulation (2):
(a) the Registrar must disregard the earlier application for that purpose; and
(b) neither the applicant nor any other person is capable of making use of the
earlier application for that purpose.
3.08 Priority date—excluded designs
For paragraph 27(1)(c) of the Act, the priority date of a design that is an
excluded design is the same priority date as it had under the initial application.
Note: This regulation also applies to a design excluded from certain transitional applications,
see regulation 12.03.
Authorised Version F2020C00913 registered 12/10/2020
Design applications Chapter 3
Amendment or withdrawal of applications Part 3.3
Regulation 3.09
Designs Regulations 2004 7
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Part 3.3—Amendment or withdrawal of applications
3.09 Request for amendment of application
(1) For subsection 28(2) of the Act, the request must:
(a) be in writing; and
(b) be clear that an amendment of a design application is being requested; and
(c) set out the nature and extent of the proposed amendments; and
(d) be accompanied by:
(i) a substitute document or representation incorporating the proposed
amendments; or
(ii) a statement setting out the proposed amendments and the place at
which each amendment is proposed to be made.
(2) If the request is not accompanied by a substitute document or representation
incorporating the proposed amendments, the applicant must, if directed by the
Registrar, file a substitute document or representation within the time allowed by
the Registrar.
3.10 Disputes between applicants—requests for determinations
For subsection 29(2) of the Act, a request must:
(a) be made in the approved form; and
(b) include a statement of the grounds on which the request is made.
3.11 Requests for direction specifying persons as applicants or entitled persons
For subsection 30(4) of the Act, a request must:
(a) be made in the approved form; and
(b) include a statement of the grounds on which the request is made.
3.12 Publication of certain details of amended applications
(1) This regulation applies in relation to a design application if, as a result of the
design application having been amended under Part 3 of Chapter 3 of the Act,
any of the details published under section 25 of the Act in relation to the
application has changed.
(2) For section 31 of the Act, the details prescribed are the following details for each
design in relation to which the published details has changed:
(a) the design number;
(b) for each detail that has changed—the detail as amended.
3.13 Withdrawal of designs and design applications
(1) For subsection 32(1) of the Act, the prescribed period:
Authorised Version F2020C00913 registered 12/10/2020
Chapter 3 Design applications
Part 3.3 Amendment or withdrawal of applications
Regulation 3.13
8 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(a) begins immediately after the design application is filed; and
(b) ends immediately before a design disclosed in the design application is
registered or published.
(2) For subsection 32(2) of the Act, the prescribed period:
(a) begins immediately after the design application is filed; and
(b) ends immediately before the design to be withdrawn is registered or
published.
(3) If a design is withdrawn, including a design disclosed in a design application that
is withdrawn, the Registrar must publish the design number in the Official
Journal.
Authorised Version F2020C00913 registered 12/10/2020
Design applications Chapter 3
Lapsing of applications Part 3.4
Regulation 3.14
Designs Regulations 2004 9
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Part 3.4—Lapsing of applications
3.14 Period within which application lapses
(1) For paragraph 33(1)(a) of the Act, the prescribed period is:
(a) if the design is an excluded design—the period:
(i) starting on the day when the request to exclude the design is filed; and
(ii) ending on the day when the application is filed; or
(b) if the design is a design mentioned in section 55 of the Act, and the period
of 6 months from the priority date of the design has expired when an
application is filed as mentioned in that section—the day when the
application is filed; or
(c) in any other case—6 months from the priority date of the design.
Note: Paragraph 3.14(1)(a) also applies to a design excluded from certain transitional
applications, see regulation 12.03.
(2) For paragraph 33(1)(b) of the Act, the prescribed period is 2 months from the
later of:
(a) the date of the first notification given by the Registrar under section 41 of
the Act in relation to the design or designs in respect of which registration
is requested; and
(b) the date of the first notification given by the Registrar under section 57 of
the Act in relation to the design or designs in respect of which publication
is requested.
3.15 Form of notice
For subsection 33(4) of the Act, the notice must:
(a) be in the form of a notice published in the Official Journal; and
(b) include the design number for each design disclosed in the application that
has not been registered or published.
Authorised Version F2020C00913 registered 12/10/2020
Chapter 4 Registration or publication of designs
Part 4.2 Requests for registration or publication
Regulation 4.01
10 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Chapter 4—Registration or publication of designs
Part 4.2—Requests for registration or publication
4.01 Requests for registration or publication
(1) This regulation does not apply to a request mentioned in section 37 or
subsection 38(2) of the Act or in subregulation 12.03(2).
(2) For paragraph 35(2)(b) of the Act, the prescribed period is:
(a) 6 months from the priority date of the design; or
(b) if the design is a design mentioned in section 55 of the Act, and the period
of 6 months has expired when an application is filed as mentioned in that
section—the day when the application is filed.
(3) For subsection 35(3) of the Act, the request must be made in the approved form.
4.02 Subsequent requests for registration—applications in respect of more than
1 design
(1) For paragraph 36(2)(a) of the Act, the Registrar may determine that the applicant
may make a request (a subsequent request) for registration of a design (an other
design) in respect of which no request for registration was made in the original
request only if:
(a) the applicant can satisfy the Registrar that it was only because of an error
or omission by the applicant or the applicant’s agent that a request was not
made for registration of the other design; and
(b) the subsequent request is made before any design disclosed in the design
application is registered or published.
(2) In this regulation:
original request means the first request made under section 35 of the Act in
relation to the design application in which the other design is disclosed.
4.03 Period within which replacements of request may be made
For subsection 38(2) of the Act, the prescribed period:
(a) begins immediately after the request for registration of the design is made;
and
(b) ends immediately before the design is registered.
Authorised Version F2020C00913 registered 12/10/2020
Registration or publication of designs Chapter 4
Registration Part 4.3
Regulation 4.04
Designs Regulations 2004 11
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Part 4.3—Registration
4.04 Formalities check—applications in respect of 1 design only
(1) For paragraph 39(2)(a) of the Act, the formalities check is confirmation, by the
Registrar, that:
(a) the design application is in the approved form; and
(b) the design application meets the requirements of regulation 11.18; and
(c) the design application identifies the product or products in relation to
which the design is sought to be registered sufficiently to enable each
product to be classified in accordance with the Locarno Agreement; and
(d) for a design application mentioned in subsection 23(2) of the Act—the
design application identifies the design number that was allocated to the
excluded design in the initial application; and
(e) if a specimen is filed as a representation of the design—the specimen is of
a kind that:
(i) can be readily mounted in a flat position by affixing it to a paper of
the size required under paragraph 1(1)(e) of Schedule 2; and
(ii) can be stored without damage to other documents; and
(iii) when mounted, is presented in a way that allows any number of
copies of the specimen to be reproduced directly by photocopying,
digital scanning, microfilming and photography; and
(f) the design application includes at least one representation of the design;
and
(g) the design application complies substantially with the formal requirements
set out in Schedule 2.
Note: For a design application in respect of a design excluded from certain transitional
applications, see also regulation 12.03.
(2) If the Registrar is not satisfied with the matter mentioned in paragraph (1)(e), the
Registrar may, in giving a notification under section 41 of the Act, require the
applicant to file another representation that complies with the paragraph.
4.05 Formalities check—applications in respect of more than 1 design
(1) For paragraph 40(2)(c) of the Act, the formalities check is confirmation, by the
Registrar, that:
(a) the design application is in the approved form; and
(b) the design application meets the requirements of regulation 11.18; and
(c) the design application identifies, for each design, the product or products in
relation to which the design is sought to be registered sufficiently to enable
each product to be classified in accordance with the Locarno Agreement;
and
Authorised Version F2020C00913 registered 12/10/2020
Chapter 4 Registration or publication of designs
Part 4.3 Registration
Regulation 4.06
12 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(d) for a design application mentioned in subsection 23(2) of the Act—the
design application identifies the design number that was allocated to the
excluded design in the initial application; and
(e) if a specimen is filed as a representation of a design—the specimen is of a
kind that:
(i) can be readily mounted in a flat position by affixing it to a paper of
the size required under paragraph 1(1)(e) of Schedule 2; and
(ii) can be stored without damage to other documents; and
(iii) when mounted, is presented in a way that allows any number of
copies of the specimen to be reproduced directly by photocopying,
digital scanning, microfilming and photography; and
(f) the design application includes at least one representation of each design
disclosed in the application; and
(g) the number of designs disclosed in the design application is the number of
designs identified, by the applicant, as being separate designs disclosed in
application; and
(h) the design application complies substantially with the formal requirements
set out in Schedule 2.
Note: For a design application in respect of a design excluded from certain transitional
applications, see also regulation 12.03.
(2) If the applicant has requested registration of some, but not all, of the designs
disclosed in the design application, the formalities check is confirmation, by the
Registrar, that the matters specified in subregulation (1) are satisfied in relation
to the part or parts of the application relating to the design or designs covered by
the request.
(3) If the Registrar is not satisfied with the matter mentioned in paragraph (1)(e), the
Registrar may, in giving a notification under section 41 of the Act, require the
applicant to file another representation that complies with the paragraph.
4.06 Registrar must refuse to register certain designs
For paragraph 43(1)(a) of the Act, the following classes of designs are
prescribed:
(a) medals;
(b) designs of a kind that the Registrar must, under subregulation 2(4) of the
Protection of Word ‘Anzac’ Regulations, refuse to register;
(c) designs of a kind mentioned in subsection 19(1) of the Crimes (Currency)
Act 1981;
(d) designs that are scandalous, or might reasonably be taken to be scandalous;
(e) the Arms, or a flag or seal, of the Commonwealth or of a State or Territory;
(f) the Arms or emblems of:
(i) a State or Territory; or
(ii) a city or town in the Commonwealth; or
(iii) a public authority or public institution in Australia;
Authorised Version F2020C00913 registered 12/10/2020
Registration or publication of designs Chapter 4
Registration Part 4.3
Regulation 4.07
Designs Regulations 2004 13
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(g) the armorial bearings, flags, State emblems or other signs of another
country.
4.07 Period within which Registrar must register certain designs after refusal
For section 44 of the Act, the prescribed period is 1 month from the date on
which the Registrar was notified of the revocation of the order.
Note: A similar arrangement is made in regulation 8.02.
4.08 Certificate of registration and notice of registration
(1) For subsection 45(3) of the Act, the certificate must include the following details
in relation to the design:
(a) the registration number;
(b) the filing date of the design application first disclosing the design;
(c) the initial term of the registration;
(d) the name and address of the registered owner;
(e) the product or products to which the design relates;
(f) the name of the designer;
(g) if a statement of newness and distinctiveness has been provided to the
Registrar—that statement;
(h) if applicable:
(i) details about any basic application made in respect of the design; and
(ii) the design number that was allocated to the excluded design in the
initial application.
Note 1: A statement of newness and distinctiveness is described in paragraph 19(2)(b) of the
Act.
Note 2: For a design application in respect of a design excluded from certain transitional
applications, see also regulation 12.03.
(2) For subsection 45(4) of the Act, the notice must:
(a) be in the form of a notice published in the Official Journal; and
(b) include the following details in relation to the design:
(i) the design number;
(ii) the registration number;
(iii) the date on which the design was registered;
(iv) the filing date of the design application first disclosing the design;
(v) if applicable:
(A) details about any basic application made in respect of the
design; and
(B) the design number that was allocated to the excluded design
in the initial application;
(vi) the product or products to which the design relates;
(vii) the Locarno Agreement classification of the product or each product;
Authorised Version F2020C00913 registered 12/10/2020
Chapter 4 Registration or publication of designs
Part 4.3 Registration
Regulation 4.09
14 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(viii) if a statement of newness and distinctiveness has been provided to the
Registrar—that statement;
(ix) the name and address of the registered owner;
(x) the name of the designer.
Note 1: A statement of newness and distinctiveness is described in paragraph 19(2)(b) of the
Act.
Note 2: For a design application in respect of a design excluded from certain transitional
applications, see also regulation 12.03.
4.09 Renewal of registration
(1) For subsection 47(2) of the Act, the prescribed period is the period of 5 years and
6 months that begins at the start of the term of registration of the design.
Note: If a renewal fee is paid after 5 years, it will attract the fee set out in paragraph (b) of
column 3 of item 5 of Schedule 4.
(2) For subsection 47(3) of the Act, the application must:
(a) be clear that renewal of the registration of the design is being requested;
and
(b) include the registration number of the design; and
(c) be accompanied by the fee set out in item 5 of Schedule 4.
4.10 Surrender of registration
For paragraph 49(3)(c) of the Act, the offer must include:
(a) a statement that an offer is made to surrender the registration of the design;
and
(b) the registration number of the design.
Note: Under subsection 49(2) of the Act, if there is more than 1 registered owner, the offer
must be made by all the registered owners.
4.11 Revocation of registration on surrender
(1) For paragraph 50(2)(a) of the Act, each other person who is entered on the
Register as having an interest in the design is prescribed.
(2) For paragraph 50(2)(b) of the Act, a person mentioned in subregulation (1) may
make a submission:
(a) in writing; and
(b) within 1 month after the date of the notice under paragraph 50(2)(a) of the
Act.
(3) The Registrar must also publish, in the Official Journal, a notice of the offer
received under section 49 of the Act.
(4) If an interested person wishes to be heard in relation to the offer, he or she must,
within 1 month after the date of publication of the notice mentioned in
subregulation (3), give notice to the Registrar of his or her wish to be heard.
Authorised Version F2020C00913 registered 12/10/2020
Registration or publication of designs Chapter 4
Registration Part 4.3
Regulation 4.12
Designs Regulations 2004 15
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(5) The Registrar may, as a preliminary issue, hear and determine the question
whether a person is an interested person.
(6) If an interested person gives notice to the Registrar under subregulation (4), the
Registrar must give the person an opportunity to be heard before exercising his
or her powers under subsection 50(3) of the Act.
4.12 Revocation of registration on grounds relating to entitled persons
For subsection 51(2) of the Act, the application must:
(a) be made in the approved form; and
(b) include a statement of the grounds on which the application is made.
4.13 Notice of revocation of registration
For subsection 52(4) of the Act, the notice must:
(a) be in the form of a notice published in the Official Journal; and
(b) include the registration number of the design.
4.14 Applications by entitled persons after revocation following surrender of
registration
For paragraph 54(1)(b) of the Act, an application must be in writing.
Authorised Version F2020C00913 registered 12/10/2020
Chapter 4 Registration or publication of designs
Part 4.4 Publication
Regulation 4.15
16 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Part 4.4—Publication
4.15 Publication of a design
(1) For subsection 57(2) of the Act, the documents:
(a) must include the applicant’s name and the designer’s name; and
(b) must meet the requirements of regulation 11.18; and
(c) must comply substantially with the formal requirements set out in
Schedule 2; and
(d) must not disclose a design that would have been refused registration under
paragraph 43(1)(b), (c) or (d) of the Act; and
(e) must not disclose a design that is of a class prescribed in paragraph 4.06(b),
(c) or (d).
(2) If the design application is in respect of more than 1 design, the requirements
specified in subregulation (1) are to be satisfied in relation to the part or parts of
the application relating to the design or designs covered by the request.
Authorised Version F2020C00913 registered 12/10/2020
Examination of designs Chapter 5
Regulation 5.01
Designs Regulations 2004 17
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Chapter 5—Examination of designs
5.01 Requirements for request for examination of design
For subsection 64(1) of the Act, the following requirements are prescribed:
(a) the request must be made in the approved form;
(b) if the request is made by a person other than the registered owner, and
contains any material in relation to the newness and distinctiveness of the
design—the material must be provided in duplicate.
5.02 Grounds for revocation of registration of design
For paragraph 65(2)(b) of the Act, a prescribed ground is that, under section 43
of the Act, the design should not have been registered.
5.03 Examination of design—procedures
(1) For paragraph 65(3)(a) of the Act, the procedures set out in this regulation are
prescribed for the conduct of an examination of a design.
(2) If, after considering under subsection 65(1) of the Act whether a ground for
revocation under subsection 65(2) of the Act exists, the Registrar is satisfied that
a ground for revocation has been made out, the Registrar must notify the
registered owner as required under subsection 66(2) of the Act.
Note: See section 67 of the Act for what is to happen if the Registrar is satisfied that a ground
for revocation has not been made out.
(3) A registered owner may respond to a notification given under subsection 66(2) of
the Act (including a further notification mentioned in subregulation (6)) by:
(a) contesting, in writing, the ground for revocation; or
(b) requesting amendment of the Register as provided under subsection 66(3)
of the Act.
(4) If the registered owner responds by contesting the ground in writing, the
Registrar must reconsider whether a ground for revocation under
subsection 65(2) of the Act exists, taking into account the written submissions
made by the registered owner.
(5) If the registered owner responds by requesting amendment of the Register, the
Registrar must consider whether the ground for revocation would be removed if
the Register were amended as proposed in the request.
(6) If:
(a) after the reconsideration mentioned in subregulation (4), the Registrar
remains satisfied that a ground for revocation has been made out; or
(b) after the consideration mentioned in subregulation (5), the Registrar is
satisfied that the ground would not be removed if the Register were
amended as proposed;
Authorised Version F2020C00913 registered 12/10/2020
Chapter 5 Examination of designs
Regulation 5.04
18 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
the Registrar must:
(c) give a further notification to the registered owner under subsection 66(2) of
the Act; or
(d) give the registered owner a reasonable opportunity to be heard under
paragraph 68(4)(a) of the Act.
(7) A further notification mentioned in subregulation (6) must, in addition to stating
that a ground for revocation has been made out, include a statement to the
following effect:
(a) if the registered owner has contested the ground in writing—that the
Registrar has taken into account the written submissions made by the
registered owner;
(b) if the registered owner has requested amendment of the Register—that the
ground would not be removed if the Register were amended as proposed.
Note: See section 67 of the Act for what is to happen if the Registrar is satisfied that a ground
for revocation has not been made out or that any such ground would be removed if the
Register were amended as proposed.
(8) If the request for examination was made by a person other than the registered
owner, the Registrar must give a copy of the notification given under
subsection 66(2) of the Act (including a further notification mentioned in
subregulation (6)) to the person who requested the examination.
Note: See section 68 of the Act for what is to happen if the Registrar remains satisfied that a
ground for revocation has been made out and the ground would not be removed if the
Register were amended as proposed.
5.04 Period in which examination of a design must be completed
For paragraph 65(3)(b) of the Act, the prescribed period is worked out as
follows:
(a) if a notification is given under subsection 66(2) of the Act in relation to the
examination, the prescribed period is 6 months after the date of the first
notification;
(b) if:
(i) a person provides material under section 69 of the Act; and
(ii) the Registrar gives the registered owner a notification under
subsection 66(2) of the Act of a ground of revocation, based on that
material;
the prescribed period is whichever of the following periods ends later:
(iii) 6 months after the date of the first notification under subsection 66(2)
of the Act in relation to the examination;
(iv) 3 months after the date of the notification under subsection 66(2) of
the Act that first raises the ground of revocation;
(c) if:
(i) the Registrar discontinues the examination of the design in accordance
with subsection 63(4) of the Act; or
(ii) if a hearing described in section 67 or 68 of the Act is requested; or
Authorised Version F2020C00913 registered 12/10/2020
Examination of designs Chapter 5
Regulation 5.05
Designs Regulations 2004 19
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(iii) if an appeal is made to the Federal Court, the Federal Magistrates
Court or the Federal Circuit Court of Australia against a decision of
the Registrar under section 67 or 68 of the Act;
the prescribed period is the period determined by the Registrar to allow the
examination to be completed.
5.05 Amendment of registration
(1) For subsection 66(4) of the Act:
(a) the request must be in writing; and
(b) the request must make it clear that an amendment of the Register is being
requested; and
(c) the request must set out the nature and extent of the proposed amendments;
and
(d) the request must be accompanied by:
(i) a substitute document or representation incorporating the proposed
amendments; or
(ii) a statement setting out the proposed amendments and the place at
which each amendment is proposed to be made; and
(e) if:
(i) the request is not accompanied by a substitute document or
representation incorporating the proposed amendments; and
(ii) the Registrar directs the registered owner under paragraph (2)(b) to
file a substitute document;
the substitute document must have been filed in accordance with the
direction.
(2) For subsection 66(5) of the Act:
(a) the Registrar must notify the registered owner if:
(i) the request does not meet the requirements mentioned in
subregulation (1); or
(ii) the proposed amendment is of a kind prohibited under
subsection 66(6) of the Act; and
(b) if the request is not accompanied by a substitute document or
representation incorporating the proposed amendments, the Registrar may
direct the registered owner to file a substitute document or representation
within the time allowed by the Registrar.
5.06 Certificate of examination and notice of examination
(1) For paragraph 67(3)(a) of the Act, the certificate must include:
(a) the registration number of the design; and
(b) the date of certification.
(2) For paragraph 67(3)(c) of the Act, the notice must:
(a) be in the form of a notice published in the Official Journal; and
(b) include the following details in relation to the design:
Authorised Version F2020C00913 registered 12/10/2020
Chapter 5 Examination of designs
Regulation 5.07
20 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(i) the registration number;
(ii) the date of certification.
(3) In this regulation:
date of certification means the date on which the Registrar is satisfied that a
certificate of examination is to be issued under subsection 67(3) of the Act in
respect of the design.
5.07 Revocation of registration after examination
For subsection 68(3) of the Act, the notice must:
(a) be in the form of a notice published in the Official Journal; and
(b) include the following details in relation to the design:
(i) the registration number;
(ii) the date on which the design was revoked.
5.08 Material provided to Registrar
For subsection 69(2) of the Act, the material must:
(a) be provided in duplicate; and
(b) be accompanied by the approved form.
Note: Under regulation 11.18, a document that is not in English must be accompanied by a
verified translation.
Authorised Version F2020C00913 registered 12/10/2020
Jurisdiction and powers of courts Chapter 7
Regulation 7.01
Designs Regulations 2004 21
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Chapter 7—Jurisdiction and powers of courts
7.01 Application to court for compulsory licence
For subsection 90(1) of the Act, the prescribed period is 3 years from the date of
registration of the design.
7.02 Revocation of registration after grant of compulsory licence
For subsection 92(1) of the Act, the prescribed period is 2 years from the date on
which the licence, or the first licence (if more than 1), was granted under
section 90 of the Act in relation to the design.
Authorised Version F2020C00913 registered 12/10/2020
Chapter 8 The Crown
Regulation 8.01
22 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Chapter 8—The Crown
8.01 Acquisition of design by the Commonwealth
For subsection 106(3) of the Act, notice of the acquisition must be published:
(a) in the Official Journal; and
(b) in the Gazette.
Note: The Commonwealth of Australia Gazette is available in hard copy and online.
8.02 Period within which designs must be registered or published after
prohibition
For subsection 108(4) of the Act, the prescribed period is 1 month from the date
on which the Registrar was made aware of the revocation of the order.
Note: A similar arrangement is made in regulation 4.07.
Authorised Version F2020C00913 registered 12/10/2020
The Register Chapter 9
Regulation 9.01
Designs Regulations 2004 23
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Chapter 9—The Register
9.01 Other particulars to be entered in the Register
For paragraph 111(2)(e) of the Act, the following particulars are prescribed:
(a) the address for service of the registered owner;
(b) the name of each other person who has an interest in the design;
(c) the designer’s name;
(d) if a statement of newness and distinctiveness was included in the
application—that fact.
9.02 Inspection of Register
For subsection 113(1) of the Act, the prescribed times, in relation to the Designs
Office or a sub-office of the Designs office, are from 9 am to 5 pm on Monday to
Friday other than a public holiday:
(a) in the place where the Designs Office or the sub-office is located; or
(b) for the purposes of the Australian Public Service in that place.
9.03 Amendments of Register to record changes of ownership
(1) For subsection 114(3) of the Act, the prescribed period is 1 month from the date
of the notification under paragraph 114(3)(a) of the Act.
(2) For subsection 114(4) of the Act, the request must:
(a) be made in the approved form; and
(b) be accompanied by satisfactory evidence of:
(i) the assignment of the interest in the design; or
(ii) the person’s interest in the design by devolution by will or by
operation of law.
9.04 Notice specifying amendments to Register
For paragraph 116(b) of the Act, the Registrar must publish a notice in the
Official Journal.
9.05 Correction of Register
(1) The Registrar may, of his or her own motion, amend an entry in the Register to
correct a clerical error or an obvious mistake.
(2) The Registrar may, on request made in the approved form, amend an entry in the
Register:
(a) to correct a clerical error or an obvious mistake; or
(b) if a name or an address entered in the Register has been changed—to
change the name or address.
Authorised Version F2020C00913 registered 12/10/2020
Chapter 9 The Register
Regulation 9.05
24 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(3) If the Registrar proposes to amend an entry in the Register, the Registrar may
notify the proposed amendment to a person who is entered in the Register as
having an interest in the design.
(4) If a proposed amendment of an entry would materially alter the meaning or scope
of the entry, the Registrar must publish, in the Official Journal, a notice of the
request to amend the entry.
(5) A person may oppose the amendment by filing a notice of opposition, in an
approved form, within one month from the publication of the notice under
subregulation (4).
Note: For the circumstances in which an extension of time can be sought, see section 137 of
the Act.
(6) The Registrar must give a copy of the notice of opposition to the person who
requested the amendment as soon as practicable.
(7) If the amendment is not opposed, the Registrar must amend the entry as
requested.
(8) If the amendment is opposed, the Registrar must amend the entry if the Registrar
decides to do so, subject to a decision of a tribunal or prescribed court in relation
to the opposition.
Authorised Version F2020C00913 registered 12/10/2020
Administration Chapter 10
Regulation 10.01
Designs Regulations 2004 25
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Chapter 10—Administration
10.01 Delegation by Registrar
(1) For subsection 124(1) of the Act, the prescribed classes of employees are:
(a) for any of the powers or functions of the Registrar under the Act (other
than the powers or functions under paragraphs 127(1)(a) and (c) of the
Act)—an employee employed at, or performing duties at, any of the
following classifications:
(i) Executive Level 2;
(ii) Executive Level 1;
(iii) APS level 6;
(iv) APS level 5;
(v) APS level 4;
(vi) APS level 3;
(vii) APS level 2; and
Note: Under paragraphs 127(1)(a) and (c) of the Act, the Registrar may summon witnesses
and require the production of documents or articles.
(b) for all or any of the powers or functions of the Registrar under the Olympic
Insignia Protection Act 1987—an employee employed at, or performing
the duties at, any of the following classifications:
(i) Executive Level 2;
(ii) Executive Level 1;
(iii) APS level 6.
Note: For the meaning of employee, see section 5 of the Act.
(2) The Registrar may delegate all or any of the Registrar’s powers or functions
under paragraph 127(1)(a) or (c) of the Act to an employee of the Designs Office
who holds or performs the duties of an Executive Level 1 position, or an
equivalent or higher position.
10.02 Costs (Act s 127)
(1) A party to proceedings before the Registrar may apply to the Registrar, in the
approved form, for an award of costs in respect of the proceedings.
(2) The application must be made:
(a) during the proceedings; or
(b) within 3 months from:
(i) the day when the Registrar makes a decision that ends the
proceedings; or
(ii) the date of the Registrar’s notification to the party that the
proceedings have been discontinued.
Authorised Version F2020C00913 registered 12/10/2020
Chapter 10 Administration
Regulation 10.02
26 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(3) The Registrar may award costs only in respect of a matter mentioned in
Schedule 3.
(4) Before awarding costs for an amount other than for an amount mentioned in
Schedule 3 in respect of the proceedings, the Registrar must give each party to
the proceedings a reasonable opportunity to be heard in relation to the award of
costs.
(5) If a bill of costs is to be filed in relation to the proceedings, the bill must be filed
within 3 months from the day when the costs are awarded.
(6) The amount of costs must be taxed, allowed and certified, in accordance with
Schedule 3, by the Registrar.
(7) The Registrar may review the taxation of costs carried out by a delegate of the
Registrar or a person authorised to act for the Registrar.
Authorised Version F2020C00913 registered 12/10/2020
Miscellaneous Chapter 11
Fees Part 11.2
Regulation 11.01
Designs Regulations 2004 27
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Chapter 11—Miscellaneous
Part 11.2—Fees
11.01 Fees payable
(1) For subsection 130(1) of the Act, the fee to be paid for a matter mentioned in an
item in Schedule 4 is specified in the item.
(2) For subsection 130(3) of the Act, the fee mentioned in an item in Schedule 4 is
payable as set out in this regulation.
Who pays
(3) A fee specified in an item is payable by the person (if any) who is specified in
the item as the person by whom the fee is payable.
To whom is it payable
(4) The fee is payable to the Registrar.
When is it payable
(5) The fee is payable at the following time:
(a) if it is for filing an application, request or other document—when the
application, request or other document is filed;
(b) if it is for appearing at a hearing:
(i) for the first day—immediately before the hearing; and
(ii) for each day or part of a day after the first day—immediately after the
completion of the hearing.
Publication
(6) For the purposes of subsection 130A(3) of the Act, the Registrar must publish the
notice in the Official Journal.
11.02 Failure to pay—fee for filing a design application
(1) This regulation applies if:
(a) the fee mentioned in item 1 in Schedule 4 is not paid on the day when it is
payable; and
(b) within 1 month after that day, the Registrar invites the applicant to pay the
fee within 2 months after the date of the invitation; and
(c) the fee is not paid within the 2 month period.
(2) The application lapses, or the registration of each design disclosed in the
application that has been registered ceases, at the end of the 2 month period.
Authorised Version F2020C00913 registered 12/10/2020
Chapter 11 Miscellaneous
Part 11.2 Fees
Regulation 11.03
28 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
11.03 Failure to pay—fee for filing a request for registration covering a further
design
(1) This regulation applies if:
(a) the fee mentioned in item 2 in Schedule 4 is not paid on the day when it is
payable; and
(b) within 1 month after the date of the first notification given under section 41
of the Act in relation to the further design, the Registrar invites the
applicant to pay the fee within 2 months after the date of the invitation; and
(c) the fee is not paid in accordance with the 2 month period.
(2) The application lapses, or the registration of each design disclosed in the
application that has been registered ceases, at the end of the 2 month period.
11.04 Failure to pay—fee payable by the registered owner for filing a request for
examination
(1) This regulation applies if:
(a) the fee mentioned in item 3 in Schedule 4 is not paid on the day when it is
payable; and
(b) within 1 month after that day, the Registrar invites the registered owner to
pay the fee within 2 months after the date of the invitation; and
(c) the fee is not paid within the 2 month period.
(2) The registration of the design ceases, at the end of the 2 month period.
11.05 Failure to pay—fee payable by the registered owner in relation to a
request for examination filed by another person
(1) This regulation applies if:
(a) the fee mentioned in paragraph (b) in column 3 of item 4 in Schedule 4 is
not paid on the day when it is payable; and
(b) within 1 month after the fee mentioned in paragraph (a) of item 4 in
Schedule 4 is paid, the Registrar invites the registered owner to pay the fee
within 2 months after the date of the invitation; and
(c) the fee is not paid within the 2 month period.
(2) The registration of the design ceases at the end of the 2 month period.
11.06 Failure to pay—certain other fees for filing
(1) This regulation applies if:
(a) the fee mentioned in:
(i) paragraph (a) in column 3 of item 4 in Schedule 4; or
(ii) item 7, 8 or 9 in Schedule 4;
is not paid on the day when it is payable; and
Authorised Version F2020C00913 registered 12/10/2020
Miscellaneous Chapter 11
Fees Part 11.2
Regulation 11.07
Designs Regulations 2004 29
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(b) within 1 month after the fee is payable, the Registrar invites the person
who files the request, application or notice to pay the fee within 2 months
after the date of the invitation; and
(c) the fee is not paid within the 2 month period.
(2) The request, application or notice is taken not to have been filed.
11.07 Failure to pay—fee for requesting a hearing
(1) This regulation applies if the fee mentioned in item 11 in Schedule 4 is not paid
when it is payable.
(2) No hearing as requested is to be held until the fee has been paid.
(3) If:
(a) within 1 month after the fee is payable, the Registrar invites the person
who files the request to pay the fee:
(i) within 2 months after the date of the invitation; or
(ii) if the date of the hearing occurs before the 2 months period—before
the date of the hearing; and
(b) the fee is not paid in accordance with the Registrar’s invitation;
the request is taken not to have been filed.
11.08 Failure to pay—fee for appearing at a hearing
If the fee mentioned in paragraph (a) in column 3 of item 12 in Schedule 4 is not
paid when it is payable, a person cannot appear at the hearing.
11.09 Failure to pay—fees for requesting supply of documents by the Registrar
(1) This regulation applies if the fee mentioned in item 13 or 14 in Schedule 4 is not
paid when it is payable.
(2) The Registrar must not process the request until the fee has been paid.
(3) If:
(a) the Registrar invites the person who files the request to pay the fee within 2
months after the date of the invitation; and
(b) the fee is not paid within the 2 month period;
the request is taken not to have been filed.
11.09A Failure to pay—fees for requesting expedited dispatch
(1) This regulation applies if a request for the supply of documents is filed as
mentioned in item 13 or 14 of the table in clause 1 of Schedule 4.
(2) The Registrar must not supply the documents by means of expedited dispatch
unless:
(a) a request that the supply be by means of expedited dispatch is filed; and
Authorised Version F2020C00913 registered 12/10/2020
Chapter 11 Miscellaneous
Part 11.2 Fees
Regulation 11.10
30 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(b) the fee mentioned in item 15 of that table for filing the request for
expedited dispatch is paid.
11.10 Consequences if Registrar does not invite payment
(1) This regulation applies if:
(a) the fee mentioned in item 1, 2, 3, 4, 7, 8 or 9 in Schedule 4 is not paid
when it is payable; and
(b) the Registrar does not give the invitation mentioned in regulation 11.02,
11.03, 11.04, 11.05 or 11.06 within the time mentioned in that regulation
for giving the invitation.
(2) The request, application or notice is to be treated as if the fee had been paid when
it was payable.
11.11 Exemption from fees (Act s 149)
The Registrar may exempt a person from the payment of the whole or any part of
a fee, if the Registrar is satisfied on reasonable grounds that the action is justified
having regard to all the circumstances.
11.12 Recovery of fees
A fee payable under these Regulations is recoverable as a debt due to the
Commonwealth.
Authorised Version F2020C00913 registered 12/10/2020
Miscellaneous Chapter 11
Extensions of time Part 11.5
Regulation 11.13
Designs Regulations 2004 31
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Part 11.5—Extensions of time
11.13 Extensions of time for doing a relevant act
(1) For subsection 137(2) of the Act, an application must:
(a) be made in the approved form; and
(b) be accompanied by a declaration setting out the grounds on which the
application is made.
(1A) Subregulation (1B) applies if:
(a) an application for an extension of time for doing a relevant act is made
under subsection 137(2) of the Act; and
(b) the relevant act has not been done; and
(c) a notice of opposition to the grant of the application is filed.
(1B) If the Registrar grants the application, the Registrar must extend the time to
include the period from the day on which the notice of opposition is filed to the
end of:
(a) if an application is made to the AAT for a review of a decision of the
Registrar—the day when the application is withdrawn or finally dealt with
or determined; or
(b) in any other case—21 days after the end of the day on which the Registrar
decides the application.
(2) For subsection 137(4) of the Act, the Registrar must advertise an application in
the Official Journal.
(3) For subsection 137(5) of the Act, the person must file a notice of opposition, in
an approved form, within one month from the advertisement of the application.
(3A) The Registrar must give a copy of the notice of opposition to the person who
applied for the extension as soon as practicable.
(4) If the Registrar grants an extension of time under section 137 of the Act, the
Registrar must publish details of the extension in the Official Journal.
11.14 Consequence of extension—notice of restoration
For paragraph 138(2)(b) of the Act, the Registrar must publish a notice in the
Official Journal.
Authorised Version F2020C00913 registered 12/10/2020
Chapter 11 Miscellaneous
Part 11.6 Other
Regulation 11.15
32 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Part 11.6—Other
11.15 Agents (Act s 141)
(1) This regulation applies if a person (an agent) acts on behalf of another person
(the principal).
(2) If the agent signs a document on behalf of the principal, the agent must note that
fact (including the principal’s name) on the document.
(3) If the agent is not a legal practitioner, he or she must not do the following on
behalf of the principal:
(a) prepare any document that is to be filed in, or issued from, a court;
(b) transact business, or conduct proceedings, in a court.
11.16 Right of lien of registered patent attorneys (Act s 142)
A registered patent attorney has, in relation to documents and property of a client
in a matter relating to designs, the same right of lien that a solicitor has in
relation to the documents and property of a client.
11.18 Documents to be in English
(1) An approved form being filed must be in English.
(2) Any other document being filed must:
(a) be in English; or
(b) if it is not in English—be accompanied by a translation of the document
into English that has with it a certificate of verification.
(3) However, subregulation (2) does not apply to text that forms part of a design.
(4) In this regulation:
certificate of verification, in relation to a translation, means a statement, dated
and signed by a person, to the effect that the translation is, to the best of the
knowledge of the person, a true and complete translation of the accompanying
document.
11.18A Publications relating to filing of documents or evidence
For the purposes of subsections 144A(3), 144B(3) and 144C(5) of the Act, the
Registrar must publish the notice in the Official Journal.
11.19 Service of documents
(1) If provision is made in an approved form to state an address for service, the
person completing the form must state:
Authorised Version F2020C00913 registered 12/10/2020
Miscellaneous Chapter 11
Other Part 11.6
Regulation 11.21
Designs Regulations 2004 33
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(a) an address in Australia or New Zealand at which a document under the Act
or these Regulations may be given to him or her personally or to the person
specified in the form as his or her representative; or
(b) an address in Australia to which it is practicable and reasonable for
Australia Post, or a person acting on behalf of Australia Post, to deliver
mail; or
(c) an address in New Zealand to which it is practicable and reasonable for a
person providing mail delivery services to deliver mail.
(2) A person may file notice of a change of his or her address for service to another
address that complies with paragraph (1)(a), (b) or (c).
(5) Service by post is a prescribed means by which a document may be served on, or
given or sent to, a person for the purposes of subsection 145(1) of the Act.
11.21 Death of applicant or registered owner (Act s 146, s 147)
(1) This regulation applies to:
(a) a legal representative who wishes to proceed with the application in
accordance with section 146 of the Act; or
(b) a person who wishes to have the Register amended in accordance with
section 147 of the Act.
(2) The legal representative or the person must file:
(a) a request in the approved form; and
(b) any other document that the Registrar reasonably considers to be necessary
to support the request.
11.22 Exercise of discretionary powers by Registrar
(1) The Registrar must give a person an opportunity to be heard before exercising a
discretionary power under these Regulations adversely to the person.
Note: See section 148 of the Act for a similar provision.
(2) For section 148 of the Act and subregulation (1), the Registrar must give the
person an opportunity to be heard by:
(a) asking the person for written submissions; or
(b) notifying the person that, on request to the Registrar, the person may be
heard by way of an oral hearing on a date, and at a time and place,
determined by the Registrar; or
(c) notifying the person of the date, time and place of an oral hearing.
(3) The Registrar may exercise the discretionary power if the person:
(a) notifies the Registrar that the person does not want to be heard; or
(b) does not file written submissions if requested under subregulation 11.23(1);
or
(c) does not attend an oral hearing if notified under subregulation 11.23(2).
Authorised Version F2020C00913 registered 12/10/2020
Chapter 11 Miscellaneous
Part 11.6 Other
Regulation 11.23
34 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(4) If the Registrar exercises discretionary power in any of the circumstances
mentioned in subregulation (3), the Registrar must notify the person of the
Registrar’s decision.
11.23 Written submissions and oral hearings
Written submissions
(1) If the Registrar decides that a person may be heard by way of written
submissions, the Registrar must:
(a) notify the person of the period in which the submissions must be filed
(being a period of at least 10 business days); and
(b) decide the matter after considering the written submissions; and
(c) notify the person of the Registrar’s decision in relation to the exercise of
the discretionary power.
Oral hearings
(2) If the Registrar decides that a person may be heard by way of an oral hearing, the
Registrar must notify the date, time and place of the hearing to the person at least
10 business days before the day the hearing is to begin.
(3) The Registrar may adjourn an oral hearing from time to time or from place to
place by notifying the person.
(4) The Registrar may hold an oral hearing in which:
(a) a person appears in person; or
(b) a person participates by telephone or other means of telecommunications
that the Registrar reasonably allows.
(5) In addition to the Registrar’s other powers, the Registrar may direct a person to
provide a written summary of submissions.
(6) The Registrar must notify a person who appears at the hearing of the Registrar’s
decision in relation to the exercise of the discretionary power.
11.24 Practice and procedure in relation to applications, oppositions and other
matters
(1) This regulation applies in relation to:
(a) applications, oppositions and matters that the Registrar is authorised, under
the Act or these Regulations, to hear and decide; and
(b) matters being decided on the motion of the Registrar.
(2) Subject to these Regulations, the practice and procedure to be followed for the
purposes of enabling the application or matter to be decided is to be determined
by the Registrar.
(3) A person to be heard at a hearing may apply to the Registrar in respect of the
practice and procedure relating to the hearing to be determined by the Registrar.
Authorised Version F2020C00913 registered 12/10/2020
Miscellaneous Chapter 11
Other Part 11.6
Regulation 11.25
Designs Regulations 2004 35
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
11.25 Giving of oral evidence
The Registrar may:
(a) require a person who has made a declaration to appear before him or her to
give evidence orally on oath or affirmation in substitution for, or addition
to, the evidence contained in the declaration; and
(b) allow the person to be cross-examined on the declaration.
11.26 Declarations
(1) A declaration required or permitted by the Act or these Regulations to be given
to the Registrar must be in the approved form.
Note: Declaration forms in the approved form are available on the IP Australia website at
www.ipaustralia.gov.au.
(2) A declaration in the form of a statutory declaration, required or permitted to be
given to the Registrar, may be given to the Registrar in an electronic form by a
means of electronic communication approved by the Registrar.
Note: A declaration that is not in the form of statutory declaration may also be given in an
electronic form by means of an electronic communication: see section 11 of the
Electronic Transactions Act 1999.
11.27 Non compliance in relation to documents other than design applications
(1) This regulation applies in relation to a document other than a design application.
(2) A document filed at the Designs Office must substantially comply with
Schedule 2 and must be in the form (if any) specified in a direction under
section 144B of the Act.
(3) If a document does not comply with subregulation (2), or is not in accordance
with any applicable approved form, the Registrar must, depending on the nature
and deficiency of the document:
(a) return the document to the person from whom the document was received,
with a statement indicating in what way the document does not comply, or
is not in accordance; or
(b) direct that person to do the things specified in the direction to ensure that
the document will comply, or will be in accordance.
(4) If the Registrar returns a document under paragraph (3)(a), the document is taken
not to have been filed.
(5) If the Registrar gives a direction under paragraph (3)(b), the document is taken to
have been filed unless the person to whom the direction was given does not
comply with the direction within 2 months from the day when it was given.
Authorised Version F2020C00913 registered 12/10/2020
Chapter 11 Miscellaneous
Part 11.6 Other
Regulation 11.27A
36 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
11.27A Consequences for evidence not meeting filing requirements
(1) If, in relation to evidence received at the Designs Office, a person does not
comply with a direction under section 144C of the Act, the Registrar may treat
the evidence:
(a) as not having been filed and notify the person, including in the notification
a statement indicating how the direction has not been complied with; or
(b) as having been filed, but direct the person to do such things as are
necessary to ensure that the direction is complied with.
(2) If the Registrar gives a direction under paragraph (1)(b) and the person does not
comply with the direction within the period specified in the direction, the
Registrar may treat the evidence as not having been filed.
11.28 Directions for actions not otherwise prescribed
If:
(a) the Registrar reasonably believes that it is necessary, for the proper
prosecution or completion of proceedings before the Registrar, for a person
to perform an act, file a document or produce evidence; and
(b) that action is not specified elsewhere in the Act or these Regulations;
the Registrar may, by notification to the person, direct the person to perform the
act, file the document or produce the evidence.
11.29 Acting for persons unable to act
(1) If a person is incapable of doing anything required or permitted by the Act or
these Regulations to be done because of infancy, mental disability, physical
disability or disease, a court may, on the application by a person acting for the
incapable person or by any other person interested in the doing of the thing:
(a) do that thing in the name of, and on behalf of, the incapable person; or
(b) appoint a person to do the thing in the name of, and on behalf of, the
incapable person.
(2) A thing done in the name of, and on behalf of, an incapable person is taken to
have been done by that person as if he or she had not been incapable when the
thing was done.
(3) In this regulation:
mental disability means a disturbance or defect, to a severely disabling degree,
of perceptual interpretation, comprehension, reasoning, learning, judgment,
memory, motivation or emotion.
11.30 Requirements that cannot be complied with for reasonable causes
If:
Authorised Version F2020C00913 registered 12/10/2020
Miscellaneous Chapter 11
Other Part 11.6
Regulation 11.31
Designs Regulations 2004 37
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(a) a person is required, under these Regulations, to sign a document, make a
declaration, file or give to the Registrar a document or evidence, or to do
any other act or thing; and
(b) the Registrar is satisfied that the person cannot reasonably comply with the
requirement;
the Registrar may, subject to any condition that he or she reasonably directs,
dispense with the requirement.
11.31 Review of decisions
(1) In this regulation:
decision has the same meaning as in the Administrative Appeals Tribunal Act
1975.
Tribunal means the Administrative Appeals Tribunal.
(2) Application may be made to the Tribunal for review of a decision of the
Registrar under subparagraph 9.05(5)(c)(ii).
(3) If the Registrar gives a person affected by a decision mentioned in
subregulation (2) written notice of the making of the decision, the notice must
include a statement to the effect that, subject to the Administrative Appeals
Tribunal Act 1975, application may be made to the Tribunal for review of that
decision by or on behalf of the person whose interests are affected.
(4) Failure to comply with subregulation (3) in relation to a decision does not affect
the validity of the decision.
11.32 Period for doing certain acts—office not open for business
For subsection 136A(1) of the Act, the circumstance is that the act is done at:
(a) the Designs Office; or
(b) a sub-office of the Designs Office;
that was not open for business.
Note: Subsection 136A(1) provides as follows:
‘(1) If the last day of a period provided by this Act (except this section) or the regulations for doing an act is a day when the Designs Office, or a sub-office of the Designs Office, is not open for business, the act may be done in prescribed circumstances on the next day when the office or sub-office is open for business.’.
11.33 Days when office not open for business
(1) For paragraph 136A(2)(a) of the Act, the days on which the Designs Office, or a
sub-office of the Designs Office, is not open for business are:
(a) Saturday; and
(b) Sunday; and
(c) Australia Day; and
(d) Anzac Day.
Authorised Version F2020C00913 registered 12/10/2020
Chapter 11 Miscellaneous
Part 11.6 Other
Regulation 11.34
38 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(2) For paragraph 136A(2)(b) of the Act, the table sets out prescribed persons.
Item Person
1 The Director General of IP Australia
2 The Deputy Director General of IP Australia
3 Another person who:
(a) is an SES employee of IP Australia; and
(b) acts with the agreement of the Director General of IP Australia
4 Another person who:
(a) is an SES employee of IP Australia; and
(b) acts with the agreement of the Deputy Director General of IP Australia
5 Another person who:
(a) is an SES employee of IP Australia; and
(b) acts with the agreement of another SES employee of IP Australia
Note: SES employee is explained in section 34 of the Public Service Act 1999. That meaning
is applied generally to Commonwealth legislation by section 2B of the Acts
Interpretation Act 1901.
(3) For paragraph 136A(2)(b) of the Act, the prescribed way of publishing a
declaration is in the Official Journal of Designs.
11.34 Period for doing certain acts—acts to which section 136A does not apply
For subsection 136A(7) of the Act, an act done in relation to proceedings in a
court or a tribunal is prescribed.
Authorised Version F2020C00913 registered 12/10/2020
Application, saving and transitional provisions Chapter 12
General Part 1
Regulation 12.01
Designs Regulations 2004 39
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Chapter 12—Application, saving and transitional
provisions
Part 1—General
12.01 Conversion of transitional applications
(1) For paragraph 159(2)(a) of the Act, the prescribed period:
(a) begins on the commencement of this subregulation; and
(b) ends immediately before:
(i) the design is registered; or
(ii) the application lapses or is withdrawn or refused.
(2) For paragraph 159(2)(c) of the Act, the request must be made in the approved
form.
12.02 Former Designs Regulations—transitional
Despite the repeal of the Designs Regulations 1982, those Regulations continue
to have effect to the extent necessary to give effect to Part 2 of Chapter 12 of the
Act.
12.03 Designs excluded from transitional applications that are not converted
applications
(1) This regulation applies if:
(a) 1 or more designs are disclosed in a transitional application; and
(b) the transitional application is amended under section 22B of the old Act to
exclude 1 or more of those designs; and
(c) the transitional application is not a converted application; and
(d) before the registration, or the refusal of the registration, of the design or
designs in the transitional application, the applicant files a design
application under section 21 of the Act in respect of 1 or more of the
designs excluded from the transitional application (the excluded
transitional designs).
Note: For a transitional application that is a converted application, see section 160 of the Act.
(2) A design application in respect of excluded transitional designs must include a
request for registration or publication of all the designs disclosed in the
application.
(3) In applying these Regulations (other than regulations 1.04 and 3.02) in relation to
an excluded transitional design:
(a) a reference to an excluded design is taken to be a reference to the excluded
transitional design; and
Authorised Version F2020C00913 registered 12/10/2020
Chapter 12 Application, saving and transitional provisions
Part 1 General
Regulation 12.04
40 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(b) a reference to an initial application is taken to be a reference to the
transitional application; and
(c) a reference to ‘the design number that was allocated to the excluded design
in the initial application’ is taken to be a reference to ‘the application
number of the transitional application in which the excluded transitional
design was disclosed’; and
(d) a reference to ‘a design application mentioned in subsection 23(2) of the
Act’ is taken to be a reference to ‘a design application mentioned in
paragraph 12.03(1)(d)’.
(4) Subregulation (5) applies in relation to a design application mentioned in
paragraph (1)(d) that was filed before this regulation commences.
(5) If a request for registration or publication of each design disclosed in the design
application is filed within the period prescribed under these Regulations, as in
force immediately before this regulation commences:
(a) the request is taken to have been filed on the day when the design
application was filed; and
(b) the design application is taken to have complied with subregulation (2).
(6) In this regulation:
transitional application means an application for registration of a design that
was made under the old Act before 17 June 2004.
12.04 Protection and compensation provisions—transitional
(1) Subsections 18(3) and 18(4) of the old Act, and regulations 29AA, 29A and 29B
of, and Schedule 1 to, the old Regulations, are taken to have effect, in relation to
an application for a licence under subregulation 29AA(2) of the old Regulations,
as if those provisions had not been repealed.
(2) Subsection 27B(7) of the old Act, and regulations 29, 29A and 29B of, and
Schedule 1 to, the old Regulations, are taken to have effect, in relation to an
application for a licence under subregulation 29(2) of the old Regulations, as if
those provisions had not been repealed.
Authorised Version F2020C00913 registered 12/10/2020
Application, saving and transitional provisions Chapter 12
Amendments made by particular instruments Part 2
Regulation 12.05
Designs Regulations 2004 41
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Part 2—Amendments made by particular instruments
12.05 Amendments made by the Intellectual Property Legislation Amendment
(Raising the Bar) Regulation 2013 (No. 1)
The amendments of these Regulations made by item 3 of Schedule 6 to the
Intellectual Property Legislation Amendment (Raising the Bar) Regulation 2013
(No. 1), other than the insertion of new subregulation 11.22(1), apply in relation
to a hearing for which the Registrar issues a hearing notice, or an invitation to be
heard, on or after 15 April 2013.
Authorised Version F2020C00913 registered 12/10/2020
Chapter 12 Application, saving and transitional provisions
Part 3 Amendments made by the Intellectual Property Laws Amendment (Productivity Commission
Response Part 1 and Other Measures) Regulations 2018
Regulation 12.06
42 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Part 3—Amendments made by the Intellectual Property
Laws Amendment (Productivity Commission
Response Part 1 and Other Measures)
Regulations 2018
12.06 Amendments made by Part 2 of Schedule 2
(1) The amendments of regulations 3.14, 4.04, 4.05, 5.03, 5.04, 9.03, 9.05, 10.02,
11.03, 11.23 and 11.28 made by Part 2 of Schedule 2 to the Intellectual Property
Laws Amendment (Productivity Commission Response Part 1 and Other
Measures) Regulations 2018 apply in relation to notifications occurring on or
after the commencement of that Part.
(2) Chapter 5, as in force immediately before the commencement of Part 2 of
Schedule 2 to the Intellectual Property Laws Amendment (Productivity
Commission Response Part 1 and Other Measures) Regulations 2018, continues
to apply on and after that commencement in relation to a notice given under
subsection 66(2) of the Act before that commencement.
(3) Regulation 10.02, as in force immediately before the commencement of Part 2 of
Schedule 2 to the Intellectual Property Laws Amendment (Productivity
Commission Response Part 1 and Other Measures) Regulations 2018, continues
to apply on and after that commencement in relation to a notice mentioned in
subparagraph 10.02(2)(b)(ii) given before that commencement.
(4) Regulation 11.03, as in force immediately before the commencement of Part 2 of
Schedule 2 to the Intellectual Property Laws Amendment (Productivity
Commission Response Part 1 and Other Measures) Regulations 2018, continues
to apply on and after that commencement in relation to a notice given under
section 41 of the Act before that commencement.
12.07 Amendments made by Part 3 of Schedule 2
(1) The amendments of regulation 5.08 made by Part 3 of Schedule 2 to the
Intellectual Property Laws Amendment (Productivity Commission Response
Part 1 and Other Measures) Regulations 2018 apply in relation to the provision
of material to the Registrar on or after the commencement of that Part.
(2) The repeal of regulation 11.01A, and the amendments of items 1, 2 and 5 of the
table in clause 1 of Schedule 4, made by Part 3 of Schedule 2 to the Intellectual
Property Laws Amendment (Productivity Commission Response Part 1 and
Other Measures) Regulations 2018 apply in relation to documents filed on or
after the commencement of that Part.
(3) The repeal of subregulation 11.25(1) made by Part 3 of Schedule 2 to the
Intellectual Property Laws Amendment (Productivity Commission Response
Authorised Version F2020C00913 registered 12/10/2020
Application, saving and transitional provisions Chapter 12
Amendments made by the Intellectual Property Laws Amendment (Productivity Commission Response
Part 1 and Other Measures) Regulations 2018 Part 3
Regulation 12.08
Designs Regulations 2004 43
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Part 1 and Other Measures) Regulations 2018 applies in relation to evidence
given on or after the commencement of that Part.
(4) The amendment of subregulation 11.25(2) made by Part 3 of Schedule 2 to the
Intellectual Property Laws Amendment (Productivity Commission Response
Part 1 and Other Measures) Regulations 2018 does not affect the validity of any
requirement or permission given under that subregulation before the
commencement of that Part.
(5) The amendments of regulation 11.27 made by Part 3 of Schedule 2 to the
Intellectual Property Laws Amendment (Productivity Commission Response
Part 1 and Other Measures) Regulations 2018 apply in relation to documents
filed on or after the commencement of that Part.
(6) Regulation 11.27A, as inserted by Part 3 of Schedule 2 to the Intellectual
Property Laws Amendment (Productivity Commission Response Part 1 and
Other Measures) Regulations 2018, applies in relation to evidence filed on or
after the commencement of that Part.
12.08 Amendments made by Part 9 of Schedule 2
The amendments of paragraphs 4.04(1)(f) and 4.05(1)(f) made by Part 9 of
Schedule 2 to the Intellectual Property Laws Amendment (Productivity
Commission Response Part 1 and Other Measures) Regulations 2018 apply in
relation to design applications filed on or after the commencement of that Part.
Authorised Version F2020C00913 registered 12/10/2020
Schedule 2 Formal requirements
Clause 1
44 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Schedule 2—Formal requirements (regulations 4.04, 4.05, 4.15 and 11.27)
1 Fitness for reproduction
(1) Each sheet included in a document must:
(a) be presented in a way that allows any number of copies of the sheet to be
reproduced directly by photocopying, digital scanning, microfilming and
photography; and
(b) not be folded, creased or cracked; and
(c) subject to subclause 5(4), have its content presented in a vertical format;
and
(d) be durable, flexible, smooth, strong, white and have a matt finish; and
(e) be of international sheet size A4; and
(f) be printed on 1 side only.
(2) A document must be free from any erasures, alterations, overwriting and
interlineations that, in the reasonable opinion of the Registrar, would:
(a) compromise the authenticity of the document; or
(b) reduce the likelihood of clear reproduction of the document.
2 Separate sheets
(1) The sheets included in an application must be connected so that they may:
(a) be readily turned to be read; and
(b) be readily separated for the purposes of reproduction and be readily
rejoined.
(2) Representations must be on a separate sheet or separate sheets to any other
documents filed in relation to the application.
3 Margins
(1) Each sheet must have a margin of at least 2.5 cm on each side.
(2) A sheet of representations must not contain a frame surrounding the
representations.
4 Textual matter
(1) All textual matter must:
(a) be typewritten; or
(b) if it cannot be typewritten—be in large and legible handwriting.
(2) The lines of any typewritten text must be 1½ spaced or double spaced
(3) The text must:
Authorised Version F2020C00913 registered 12/10/2020
Formal requirements Schedule 2
Clause 5
Designs Regulations 2004 45
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(a) be presented in letters the capitals of which are at least 0.21 cm high; and
(b) be presented in a dark colour; and
(c) be indelible.
5 Additional requirements for representations
(1) A single representation must not exceed a single sheet.
(2) A single sheet may include more than 1 representation.
(3) Subject to subclause (4), if there are 2 or more representations on a sheet, each
representation must be presented in a vertical format and be separated from each
other.
(4) If the representations on a sheet cannot be presented in a vertical format, each
representation must be presented in a horizontal format with the top of the
representation towards the left of the sheet (when viewed in a vertical format).
(5) Each sheet of representations must be numbered using a pair of numbers (written
in Arabic numerals) separated by ‘/’, the 1st number being the sheet number
(beginning with ‘1’) and the 2nd number being the total number of sheets of
representations (eg 1/10, 2/10 and 3/10).
(6) If:
(a) the application is for 1 design; and
(b) the design is a common design in relation to more than 1 product;
the representations must show the design in relation to each product identified in
the application
(7) If the application is for more than 1 design:
(a) each design must be separately and clearly indicated; and
(b) a single sheet cannot be used to show more than 1 design.
(8) Originals and copies of drawings must be executed in durable, black, dense,
dark, uniformly thick and well-defined lines and strokes without colouring.
(9) A line in a drawing must generally be drawn with the aid of drafting instruments.
(10) A cross-section must be indicated by oblique hatching that does not impede the
clear reading of reference letters, numbers or signs and leading lines.
(11) The scale of a representation and the distinctness of its execution must enable all
details to be distinguished without difficulty on a photographic reproduction of
the representation with a 2/3 linear reduction in size.
(12) Each representation must be shown in proper proportion to each other
representation, except when the use of a different proportion is necessary for
clarity of the representation.
(13) A letter, number or reference line shown on a representation must be presented
simply and be clear.
Authorised Version F2020C00913 registered 12/10/2020
Schedule 2 Formal requirements
Clause 6
46 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
(14) Brackets, braces, circles or inverted commas must not be used in association with
letters or numbers.
(15) A representation must not include descriptive text, other than any word or words
necessary for the understanding of the representation.
(16) The height of a letter or a number in a representation must be at least 0.32 cm.
6 Photographs and digital images
(1) Photographs must be original and clear.
(2) Photographs of specimens must be taken against a neutral and contrasting
background.
(3) Photographs must be mounted on paper as follows:
(a) the paper and mounting adhesive must be of a nature that will not cause
deterioration of the photograph;
(b) the paper and mounting must allow any number of copies of the
photograph to be reproduced directly by photocopying, digital scanning,
microfilming and photography;
(c) the photograph and paper must not be folded, creased or cracked;
(d) subject to subclause 5(4), the photograph must be mounted in a vertical
format;
(e) the photograph must be mounted:
(i) on paper that is durable, flexible, smooth, strong, white and have a
matt finish; and
(ii) on paper that is of international sheet size A4; and
(iii) on 1 side of the paper only.
(4) Representations printed from a digital images must be clear and of high
definition.
7 Electronic documents
A document that is filed in electronic form must be in the approved form.
8 Scandalous matter
An application must not contain any scandalous matter, or matter that might
reasonably be taken to be scandalous.
Authorised Version F2020C00913 registered 12/10/2020
Costs Schedule 3
Costs Part 1
Designs Regulations 2004 47
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Schedule 3—Costs (regulation 10.02)
Part 1—Costs
Item Matter Amount
1 Preparing notice of opposition $200
2 Receiving and perusing notice of opposition $130
3 Preparation of case for hearing $525
4 Attendance at hearing by:
(a) a registered patent attorney without counsel; or
(b) a registered trade marks attorney without counsel; or
(c) a solicitor without counsel
$260 an hour, but not
more than $1 170 a day
5 Attendance at hearing by:
(a) a registered patent attorney instructing counsel; or
(b) a registered trade marks attorney instructing counsel; or
(c) a solicitor instructing counsel
$200 an hour, but not
more than $900 a day
6 Counsel fees for attendance at hearing $300 an hour, but not
more than $1 350 a day
Authorised Version F2020C00913 registered 12/10/2020
Schedule 3 Costs
Part 2 Expenses and allowances
48 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Part 2—Expenses and allowances
Division 1—Expenses
1 A person who has paid a fee prescribed in these Regulations in relation to
proceedings before the Registrar may be paid the amount of the fee.
Note: If the person wishes to be paid, the person must apply for an award of costs in respect
of the proceedings: see regulation 10.02.
2 A person attending proceedings before the Registrar must be paid:
(a) a reasonable amount for allowances for transport between the person’s
usual place of residence and the place where he or she attends the
proceedings; and
(b) if the person is required to be absent overnight from his or her usual place
of residence—a reasonable amount for allowances up to a daily maximum
of $700 for meals and accommodation.
Division 2—Allowances
3 A person who, because of his or her professional, scientific or other special skill
or knowledge, is summoned to appear as a witness before the Registrar must be
paid:
(a) if the person is remunerated in his or her occupation by wages, salary or
fees—an amount equal to the amount of wages, salary or fees not paid to
the person because of his or her attendance as a witness; or
(b) in any other case—an amount of not less than $140, or more than $700, for
each day when he or she so attends.
4 A person summoned to appear as a witness, other than a witness referred to in
clause 3, before the Registrar must be paid:
(a) if the person is remunerated in his or her occupation by wages, salary or
fees—an amount equal to the amount of wages, salary or fees not paid to
the person because of his or her attendance as a witness; or
(b) in any other case—an amount of not less than $80, or more than $130, for
each day when he or she so attends.
Authorised Version F2020C00913 registered 12/10/2020
Fees Schedule 4
Clause 1
Designs Regulations 2004 49
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Schedule 4—Fees Note: See regulation 11.01.
1 Table of fees
The following table sets out fees that are payable in relation to matters specified
in the table.
Item Matter Fee
1 Filing a design application:
(a) in respect of one design as mentioned in
paragraph 22(1)(a) or (b) of the Act:
(i) by preferred means; $250
(ii) by another means; $450
(b) in respect of more than one design as
mentioned in paragraph 22(1)(c) or (d) of the
Act:
(i) by preferred means; The sum of:
(a) $250; and
(b) $200 for each design, other than the
first one, identified by the applicant
as being a separate design disclosed
in the application
(ii) by another means The sum of:
(a) $450; and
(b) $400 for each design, other than the
first one, identified by the applicant
as being a separate design disclosed
in the application
2 Filing a request for registration covering a further
design
(a) by preferred means; $250 for each further design covered by
the request
(b) by another means $450 for each further design covered by
the request
3 Filing a request, by the registered owner of a
design, for examination of the design
$420
4 Filing a request, by a person other than the
registered owner of a design, for examination of a
design
(a) payable by the person filing the
request—$210; and
(b) payable by the registered owner—
$210
5 Filing an application for renewal of the
registration of a design
(a) by preferred means $400
Authorised Version F2020C00913 registered 12/10/2020
Schedule 4 Fees
Clause 1
50 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Item Matter Fee
(b) by another means $450
and, in addition, if the fee is paid after the expiry
of 5 years from the day when the term of
registration of the design starts
$100 for each month or part of a month
after the expiry of the 5 years and
before the fee is paid (maximum $600)
7 Filing an application for an extension of time on
the ground specified in paragraph 137(2)(a) of the
Act
$100 for each month or part of a month
for which the extension is sought
8 Filing an application for an extension of time on
the ground specified in paragraph 137(2)(b) of the
Act
$100
9 Filing a notice of opposition $600
11 Filing a request for a hearing $600
12 Appearing at a hearing $600 for each day, or part of a day, less
any amount paid under item 11 in
relation to the hearing
13 Filing a request for the supply, by the Registrar, of
not more than 3 documents relating to a single
design application or a single design number
$50 for each document
14 Filing a request for the supply, by the Registrar, of
4 or more documents relating to a single design
application or a single design number
$200 for each request
15 If a request for the supply of documents is filed as
mentioned in item 13 or 14—filing a request that
the supply be by means of expedited dispatch
$20 for each request for the supply of
documents
Authorised Version F2020C00913 registered 12/10/2020
Endnotes
Endnote 1—About the endnotes
Designs Regulations 2004 51
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Endnotes
Endnote 1—About the endnotes
The endnotes provide information about this compilation and the compiled law.
The following endnotes are included in every compilation:
Endnote 1—About the endnotes
Endnote 2—Abbreviation key
Endnote 3—Legislation history
Endnote 4—Amendment history
Abbreviation key—Endnote 2
The abbreviation key sets out abbreviations that may be used in the endnotes.
Legislation history and amendment history—Endnotes 3 and 4
Amending laws are annotated in the legislation history and amendment history.
The legislation history in endnote 3 provides information about each law that has amended (or
will amend) the compiled law. The information includes commencement details for amending
laws and details of any application, saving or transitional provisions that are not included in
this compilation.
The amendment history in endnote 4 provides information about amendments at the provision
(generally section or equivalent) level. It also includes information about any provision of the
compiled law that has been repealed in accordance with a provision of the law.
Editorial changes
The Legislation Act 2003 authorises First Parliamentary Counsel to make editorial and
presentational changes to a compiled law in preparing a compilation of the law for
registration. The changes must not change the effect of the law. Editorial changes take effect
from the compilation registration date.
If the compilation includes editorial changes, the endnotes include a brief outline of the
changes in general terms. Full details of any changes can be obtained from the Office of
Parliamentary Counsel.
Misdescribed amendments
A misdescribed amendment is an amendment that does not accurately describe the
amendment to be made. If, despite the misdescription, the amendment can be given effect as
intended, the amendment is incorporated into the compiled law and the abbreviation “(md)”
added to the details of the amendment included in the amendment history.
If a misdescribed amendment cannot be given effect as intended, the abbreviation “(md not
incorp)” is added to the details of the amendment included in the amendment history.
Authorised Version F2020C00913 registered 12/10/2020
Endnotes
Endnote 2—Abbreviation key
52 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Endnote 2—Abbreviation key
ad = added or inserted o = order(s)
am = amended Ord = Ordinance
amdt = amendment orig = original
c = clause(s) par = paragraph(s)/subparagraph(s)
C[x] = Compilation No. x /sub-subparagraph(s)
Ch = Chapter(s) pres = present
def = definition(s) prev = previous
Dict = Dictionary (prev…) = previously
disallowed = disallowed by Parliament Pt = Part(s)
Div = Division(s) r = regulation(s)/rule(s)
ed = editorial change reloc = relocated
exp = expires/expired or ceases/ceased to have renum = renumbered
effect rep = repealed
F = Federal Register of Legislation rs = repealed and substituted
gaz = gazette s = section(s)/subsection(s)
LA = Legislation Act 2003 Sch = Schedule(s)
LIA = Legislative Instruments Act 2003 Sdiv = Subdivision(s)
(md) = misdescribed amendment can be given SLI = Select Legislative Instrument
effect SR = Statutory Rules
(md not incorp) = misdescribed amendment Sub-Ch = Sub-Chapter(s)
cannot be given effect SubPt = Subpart(s)
mod = modified/modification underlining = whole or part not
No. = Number(s) commenced or to be commenced
Authorised Version F2020C00913 registered 12/10/2020
Endnotes
Endnote 3—Legislation history
Designs Regulations 2004 53
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Endnote 3—Legislation history
Number and year FRLI registration or
gazettal
Commencement Application, saving and
transitional provisions
117, 2004 11 June 2004 17 June 2004 (r 1.02)
325, 2004 25 Nov 2004 25 Nov 2004 (r 2) —
50, 2005 29 Mar 2005 (F2005L00761) 3 Apr 2005 (r 2) —
355, 2006 15 Dec 2006 (F2006L03971) Sch 1: 1 Mar 2007 (r 2) —
40, 2007 23 Mar 2007 (F2007L00650) Sch 1: 27 Mar 2007 (r 2(a)) —
279, 2008 19 Dec 2008 (F2008L04588) Sch 4: 1 Jan 2009 (r 2) —
150, 2009 26 June 2009 (F2009L02472) Sch 4: 1 July 2009 (r 2) —
332, 2009 27 Nov 2009 (F2009L04297) Sch 3: 12 Dec 2009 (r 2) —
62, 2011 16 May 2011 (F2011L00773) Sch 4: 1 July 2011 (r 2) —
217, 2011 29 Nov 2011 (F2011L02480) Sch 1 (item 1.1): 27 Dec
2011 (r 2(a))
—
66, 2012 14 May 2012 (F2011L01031) s 5(2) and Sch 3 (items 1–7):
1 July 2012 (s 2(a)(i), (iv)))
Sch 3 (item 8): 1 Oct 2012 (s
2(b))
s 5(2)
31, 2013 18 Mar 2013 (F2013L00479) Sch 3 (items 31, 32), Sch 6
(items 1–4) and Sch 7
(items 5, 6): 15 Apr 2013 (s
2)
—
88, 2015 19 June 2015 (F2015L00852) Sch 3 (items 1, 2) and Sch 5
(items 1, 2): 20 June 2015 (s
2(1) items 4, 6)
—
Name Registration Commencement Application, saving and
transitional provisions
Intellectual Property
Legislation Amendment (Fee
Review) Regulation 2016
19 Aug 2016 (F2016L01306) Sch 1 (items 1–9): 10 Oct
2016 (s 2(1) item 1)
—
Intellectual Property
Legislation Amendment
(Single Economic Market
and Other Measures)
Regulation 2016
14 Nov 2016 (F2016L01754) Sch 3 (items 1–5): 24 Feb
2017 (s 2(1) item 2)
—
Intellectual Property Laws
Amendment (Productivity
Commission Response Part 1
and Other Measures)
Regulations 2018
16 Oct 2018 (F2018L01435) Sch 2 (items 15–33, 111–
123, 187, 188): 24 Feb 2019
(s 2(1) items 6, 7, 9)
Sch 2 (items 217, 218, 231,
232): 17 Oct 2018 (s 2(1)
items 11, 14)
—
Authorised Version F2020C00913 registered 12/10/2020
Endnotes
Endnote 3—Legislation history
54 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Name Registration Commencement Application, saving and
transitional provisions
Intellectual Property Laws
Amendment (PCT
Translations and Other
Measures) Regulations 2019
25 Mar 2019 (F2019L00376) Sch 2 (items 1, 2): 26 Mar
2019 (s 2(1) item 3)
—
Intellectual Property Laws
Amendment (Fee Amounts
and Other Measures)
Regulations 2020
7 Aug 2020 (F2020L00997) Sch 1 (items 1–8): 1 Oct
2020 (s 2(1) item 1)
—
Authorised Version F2020C00913 registered 12/10/2020
Endnotes
Endnote 4—Amendment history
Designs Regulations 2004 55
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Endnote 4—Amendment history
Provision affected How affected
Chapter 1
r 1.02 ............................................. rep LA s 48D
r 1.03 ............................................. rep LA s 48C
r 1.04 ............................................. am No 325, 2004; No 66, 2012; F2018L01435; F2020L00997
r 1.05 ............................................. rs No 31, 2013
r 1.06 ............................................. ad No 88, 2015
Chapter 3
Part 3.2
r 3.03 ............................................. rep F2018L01435
r 3.04 ............................................. am No 325, 2004
r 3.08 ............................................. am No 325, 2004
Part 3.4
r 3.14 ............................................. am No 325, 2004; F2018L01435
Chapter 4
Part 4.2
r 4.01 ............................................. am No 325, 2004
Part 4.3
r 4.04 ............................................. am No 325, 2004; F2018L01435
r 4.05 ............................................. am No 325, 2004; F2018L01435
r 4.08 ............................................. am No 325, 2004
Chapter 5
r 5.03 ............................................. am F2018L01435
r 5.04 ............................................. am No 31, 2013; F2018L01435
r 5.08 ............................................. am No 88, 2015; F2018L01435
Chapter 9
r 9.03 ............................................. am F2018L01435
r 9.05 ............................................. am No 31, 2013; F2018L01435
Chapter 10
r 10.01 ........................................... am F2019L00376
r 10.02 ........................................... am F2018L01435
Chapter 11
Part 11.2
r 11.01 ........................................... am No 66, 2012; F2016L01306; F2018L01435
r 11.01A......................................... ad No 66, 2012
rep F2018L01435
r 11.03 ........................................... am F2018L01435
r 11.06 ........................................... am F2016L01306
Authorised Version F2020C00913 registered 12/10/2020
Endnotes
Endnote 4—Amendment history
56 Designs Regulations 2004
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Provision affected How affected
r 11.09 ........................................... am No 325, 2004; F2016L01306
r 11.09A......................................... ad F2020L00997
r 11.10 ........................................... am F2016L01306
Part 11.5
r 11.13 ........................................... am No 31, 2013; No 88, 2015
Part 11.6
r 11.17 ........................................... rep No 332, 2009
r 11.18A......................................... ad F2018L01435
r 11.19 ........................................... am No 62, 2011; F2016L01754; F2018L01435
r 11.20 ........................................... rep F2018L01435
r 11.22 ........................................... rs No 31, 2013
r 11.23 ........................................... rs No 31, 2013
am F2018L01435
r 11.25 ........................................... am F2018L01435
r 11.26 ........................................... am No 150, 2009
rs No 66, 2012
r 11.27 ........................................... am F2018L01435
r 11.27A......................................... ad F2018L01435
r 11.28 ........................................... am F2018L01435
r 11.32 ........................................... ad No 40, 2007
r 11.33 ........................................... ad No 40, 2007
am No 62, 2011; No 217, 2011
r 11.34 ........................................... ad No 40, 2007
Chapter 12
Chapter 12 heading........................ rs F2018L01435
Part 1
Part 1 heading................................ ad No 31, 2013
r 12.03 ........................................... ad No 325, 2004
r 12.04 ........................................... ad No 325, 2004
Part 2
Part 2 ............................................. ad No 31, 2013
r 12.05 ........................................... ad No 31, 2013
Part 3
Part 3 ............................................. ad F2018L01435
r 12.06 ........................................... ad F2018L01435
r 12.07 ........................................... ad F2018L01435
r 12.08 ........................................... ad F2018L01435
Schedule 1 ..................................... am No 50, 2005; No 40, 2007; No 279, 2008; No 66, 2012
rep No 31, 2013
Authorised Version F2020C00913 registered 12/10/2020
Endnotes
Endnote 4—Amendment history
Designs Regulations 2004 57
Compilation No. 19 Compilation date: 01/10/2020 Registered: 12/10/2020
Provision affected How affected
Schedule 3
Part 1
Part 1 ............................................. rs No 355, 2006
Part 2
Part 2 ............................................. am No 355, 2006
Schedule 4
Schedule 4 heading........................ rs F2016L01306
Schedule 4 ..................................... am No 325, 2004; No 355, 2006
rs No 66, 2012
am F2016L01306; F2018L01435; F2020L00997
Authorised Version F2020C00913 registered 12/10/2020